中国光学, 2013, 6 (1): 57, 网络出版: 2013-02-06   

支撑应力对光刻透镜透射波前畸变的影响

Influence of mounting stress on wavefront distortion of lithographic object lens
作者单位
中国科学院 长春光学精密机械与物理研究所 应用光学国家重点实验室,吉林 长春 130033
摘要
为了设计光刻物镜的支撑结构,建立了支撑应力对透镜透射波前影响的模型,研究了该模型中支撑应力与折射率的关系及支撑应力对透镜透射波前畸变的影响。首先,根据晶体理论,建立了融石英透镜波前畸变与支撑应力之间关系的仿真模型。然后,分析了不同支撑结构下支撑应力与融石英透镜波前的关系。最后,分析了支撑应力造成的透射波前畸变的性质,并选择合适的物镜支撑结构。研究结果表明:光刻物镜支撑结构的支撑应力对透镜的透射波前有很大的影响:3点支撑的波前畸变PV值为369 nm;随着支撑点数量的增加,支撑应力造成的透射波前畸变逐渐减少;采用大于9点的支撑结构即可满足光刻投影物镜的元件支撑需求。
Abstract
To design the mounting structure of a lithographic object lens, the influence model of mounting stress on the lens wavefront distortion was built. The relation between mounting stress and refractivity and the influence of mounting stress on the wavefront distortion of the lens were studied. First, based on the crystal theory, the relationship of lens mounting stress and wavefront distortion of a fused silica lens was established. Then, the influence of different lens mounting structures on the lens wavefront distortion was analyzed. Finally, the properties of lens mounting wavefront distortion were researched, and the fitted lens mounting structure was selected. Analysis results indicate that the lens mounting stress has a great influence on the lens wavefront distortion. The wavefront distortion of a 3-point mounting structure is 369 nm. However, the wavefront distortion induced by mounting stress decreases with the increasing mounting points. The above 9-point mounting structure is fitted to the lithographic object lens.

王平, 田伟, 王汝冬, 王立朋. 支撑应力对光刻透镜透射波前畸变的影响[J]. 中国光学, 2013, 6(1): 57. WANG Ping, TIAN Wei, WANG Ru-dong, WANG Li-peng. Influence of mounting stress on wavefront distortion of lithographic object lens[J]. Chinese Optics, 2013, 6(1): 57.

本文已被 3 篇论文引用
被引统计数据来源于中国光学期刊网
引用该论文: TXT   |   EndNote

相关论文

加载中...

关于本站 Cookie 的使用提示

中国光学期刊网使用基于 cookie 的技术来更好地为您提供各项服务,点击此处了解我们的隐私策略。 如您需继续使用本网站,请您授权我们使用本地 cookie 来保存部分信息。
全站搜索
您最值得信赖的光电行业旗舰网络服务平台!