强激光与粒子束, 2013, 25 (4): 822, 网络出版: 2013-03-27   

高功率二极管端泵浦板条模块波前畸变实验研究

Experiment research on wavefront distortion of high power diode end-pumped slab module
作者单位
1 电子科技大学 物理电子学院, 成都 610054
2 中国工程物理研究院 高能激光科学与技术重点实验室, 四川 绵阳 621900
摘要
二极管激光器阵列端泵浦Nd:YAG板条具有热效应低、波前畸变小的特点, 温度场和应力场的不均匀是引起板条增益介质波前畸变的主要原因。对端泵浦传导冷却Nd:YAG板条增益模块的泵浦和冷却均匀性进行了优化设计, 获得了板条激光增益模块静态波前畸变最大偏差(PV)值为0.22 μm。该模块用于双通放大器实验装置中, 测试了板条增益模块有无注入功率条件下的波前畸变, 测得无注入功率波前畸变PV值为3.49 μm, 能量提取后波前畸变PV值为3.41 μm。在注入功率3120 W时, 获得输出激光功率4660 W, 光束质量为3.88倍衍射极限, 该模块光光效率为27%。
Abstract
The Nd:YAG slab end-pumped by laser diode arrays features small thermal effect and wavefront distortion. The theoretical analyses show that inhomogeneity of the temperature field and stress field is the main cause of wavefront distortion in the slab gain medium. For the end-pumped conduction cooled slab gain module, we optimized the pump and thermal uniformity by reasonable design and obtained the static wavefront distortion with a peak-valley (PV) value of 0.22 μm. We tested the wavefront distortion of this module in the double-amplifier experiment device, deriving the PV values of 3.49 μm without the signal power injection and 0.59 μm after energy extraction. At the injection power of 3120 W, we obtained an output power of 4660 W and a beam quality value of 3.88 times the diffraction limit, with an optical-optical efficiency of 27%.

陈月健, 王建东, 童立新, 纪红, 高清松. 高功率二极管端泵浦板条模块波前畸变实验研究[J]. 强激光与粒子束, 2013, 25(4): 822. Chen Yuejian, Wang Jiandong, Tong Lixin, Ji Hong, Gao Qingsong. Experiment research on wavefront distortion of high power diode end-pumped slab module[J]. High Power Laser and Particle Beams, 2013, 25(4): 822.

本文已被 6 篇论文引用
被引统计数据来源于中国光学期刊网
引用该论文: TXT   |   EndNote

相关论文

加载中...

关于本站 Cookie 的使用提示

中国光学期刊网使用基于 cookie 的技术来更好地为您提供各项服务,点击此处了解我们的隐私策略。 如您需继续使用本网站,请您授权我们使用本地 cookie 来保存部分信息。
全站搜索
您最值得信赖的光电行业旗舰网络服务平台!