基于对S型结构的理论分析, 将中心频率设置为60 GHz, 通过合理的改变单元结构中相应的尺寸以实现所需电谐振和磁谐振频率, 并且经过优化以实现负介电常量和负磁导率的重合频段尽可能理想. 运用反演参量提取方法进行电磁参量提取, 可以得到本设计在58.1~61.4 GHz频段内其ε和μ同时为负, 即左手频段. 分析散射参量的仿真结果, 在58~62 GHz频段内S21大于-3 dB,在59.8~60.4 GHz频段内, S11小于-20 dB, 因此该设计结果可以运用于60 GHz通信滤波器和天线等器件的研究与设计.

The S-typed LHM is selected as design objective. The center frequency of S-typed structure is set as 60 GHz. By reasonably varing the corresponding parameters size of unit structure, the required electric resonance and magnetic resonance frequency can be obtained. Based on the theoretical analysis of S-typed structure, the coincidence frequency of negative permeability and permittivity can be optimized as possible as ideal. The dielectric constant of substrate can effect the characteristic and stability of LHM. In this paper, the dielectric constant is set as 2.2. The electromagnetic parameters are extracted using NRW method. The negative ε and negative μ index can be obtained in the band from 58.1 GHz to 61.4 GHz which is proved as left-hand band. From the simulation results of scattering parameters, it can be observed that the S21 values are greater than -3 dB with the frequency range from 58 GHz to 62 GHz and the S11 values are less than -20 dB with the frequency range of 59.8~60.4 GHz. Therefore, the results can be referred as the design of filter and antenna for 60 GHz communication.