应用光学, 2013, 34 (1): 117, 网络出版: 2013-05-22  

数字电影反光镜3D扫描面形检测与评价

Surface inspection and evaluation of ellipsoidal mirror using 3D scanning
作者单位
沈阳仪表科学研究院,辽宁 沈阳 110043
摘要
通过3D扫描的方法,对椭球反光镜的面形进行了检测,并与标准椭球面形进行最佳拟合对比,以E210反光镜为例。结果表明:3D扫描能够完成椭球反光镜的检测,E210反光镜在底孔部位存在加工过量,在端口部位存在近似“十字形”对称的加工不足的现象,加工误差范围为-0.06 mm ~+0.08 mm,符合轮廓度误差±0.1 mm的要求。3D扫描点云能够进行逆向反求并建立实际反射面模型,进一步模拟反光镜的反射光斑形状、大小等参数,模拟结果与检测结果一致。
Abstract
By using 3D scanning detection method, we measured the surface of ellipsoidal reflector and performed the best fitting contrast with the standard ellipsoidal suface-taking E210 reflector as an example. The result shows that the 3D scan detection method is capable of ellipsoidal reflector inspection, and the E210 ellipsoidal reflector is processed excessively on the bottom and insufficiently on the top in an approximate shape like “cross”. The processing error is -0.06 mm~+0.08 mm, which meets the limited profile error range of -0.1 mm~+0.1 mm. We carried out the reverse calculation according to the scanned point cloud data and established an actual reflection surface model, moreover, further simulation of reflector parameters, such as reflecting spot shape and size, was accomplished. The simulation results correspond well to the test result.

吕少波, 王银河, 雷鹏, 姚春龙, 高鹏, 阴晓俊. 数字电影反光镜3D扫描面形检测与评价[J]. 应用光学, 2013, 34(1): 117. Lv Shao-bo, WANG Yin-he, LEI Peng, YAO Chun-long, GAO Peng, YIN Xiao-jun. Surface inspection and evaluation of ellipsoidal mirror using 3D scanning[J]. Journal of Applied Optics, 2013, 34(1): 117.

关于本站 Cookie 的使用提示

中国光学期刊网使用基于 cookie 的技术来更好地为您提供各项服务,点击此处了解我们的隐私策略。 如您需继续使用本网站,请您授权我们使用本地 cookie 来保存部分信息。
全站搜索
您最值得信赖的光电行业旗舰网络服务平台!