强激光与粒子束, 2013, 25 (9): 2408, 网络出版: 2013-08-28   

电爆炸制备纳米铜粉及物相研究

Preparation and phase analysis of Cu nanopower by electrical explosion
作者单位
1 攀枝花学院 数学与计算机学院, 四川 攀枝花 617000
2 四川大学 电子信息学院, 成都 610065
摘要
采用电爆炸法制造纳米金属颗粒。分析了铜丝在电爆炸过程中的物态变化,即从固态、液态、气态到离子态;同时理论研究了纳米铜粉粒径大小及分布、成分组成与爆炸时的能量、铜丝的直径和铜丝长度的关系;定义了粒径均匀度,通过粒径平均大小和粒径均匀度比较,分析了纳米粒径的大小分布情况;通过X射线衍射仪(XRD),透射电子显微镜(TEM)对电爆炸制造出的纳米铜颗粒做了测定与定量分析。结果表明:铜粉的主要成分由氧化铜、氧化亚铜及单晶铜组成,各成分所占比例与爆炸缸内的真空度相关。纳米金属微粒的粒径平均值、粒径均匀度与铜丝长度、直径、充电电压、放电时间等因素相关。
Abstract
The electric explosive method has the advantages of simple operation and mass production to make nano metal particles. The changes of the copper wore in the electrical explosion process are analyzed, and the changes can be divided into the states of solid, liquid, gas and plasma. The relationships between the size, size distribution and composition of nano copper particle, and the explosion energy, copper wire diameter and the length of copper wire are studied. The particle size uniformity is defined, and the distribution of the nanoparticle size is analyzed based on the comparing analysis in the average diameter size and the particle size uniformity. The corresponding experimental researches are carried out, and the analysis and the test of the produced nanometer copper powder are completed by the Xray diffraction (XRD) and transmission electron microscopy (TEM).

李世文, 冯国英, 李玮, 殷家家, 周寿桓. 电爆炸制备纳米铜粉及物相研究[J]. 强激光与粒子束, 2013, 25(9): 2408. Li Shiwen, Feng Guoying, Li Wei, Yin Jiajia, Zhou Shouhuan. Preparation and phase analysis of Cu nanopower by electrical explosion[J]. High Power Laser and Particle Beams, 2013, 25(9): 2408.

本文已被 2 篇论文引用
被引统计数据来源于中国光学期刊网
引用该论文: TXT   |   EndNote

相关论文

加载中...

关于本站 Cookie 的使用提示

中国光学期刊网使用基于 cookie 的技术来更好地为您提供各项服务,点击此处了解我们的隐私策略。 如您需继续使用本网站,请您授权我们使用本地 cookie 来保存部分信息。
全站搜索
您最值得信赖的光电行业旗舰网络服务平台!