激光与光电子学进展, 2013, 50 (10): 102204, 网络出版: 2013-09-04
LED太阳模拟器光学系统设计与仿真 
下载： 662次
Design and Simulation of the Optical System of LED Solar Simulator
光学设计 太阳模拟器 光谱匹配 不均匀度 准直角 optical design solar simulator spectrum matching TracePro TracePro non-uniformity collimation angle
摘要
设计了一款以大功率LED作为光源的针对光伏性能测试的太阳模拟器光学系统。利用不同峰值波长的LED作为模拟器的光源并介绍了光谱匹配方法。根据LED发光特点，选取同轴透射式准直光学系统，系统由大功率LED、准直系统、菲涅耳透镜、光学积分器、光阑等光学器件组成。准直系统采用全内反射自由曲面透镜，光学积分器采用对称式透镜阵列结构。系统采用光学仿真软件TracePro进行模拟，模拟结果表明:在直径为220 mm的有效辐照面上辐照度不均匀度为3.8%，准直角为3.2°。
Abstract
An optical system of LED solar simulator for photovoltaic performance test is designed by using LED source. A method of employing LEDs with different peak wavelengths as light source to build a solar spectrum is introduced. By taking use of the characteristics of the LEDs, a concentric transmission collimating system is used, including high power LEDs, collimating system, Fresnel lens, optical integrator and aperture. The free-form surface collimating system with the total internal reflection of free-form surface lens and symmetrical lens array structure in optical integrator is adopted. The results demonstrated by optical simulation software of TracePro show that in the effective radiation circle area within 220 mm diameter, the non-uniformity is 3.8% and the collimation angle is 3.2°.
孙健刚, 李果华, 朱孔硕, 赵洁心, 马晓光. LED太阳模拟器光学系统设计与仿真[J]. 激光与光电子学进展, 2013, 50(10): 102204. Sun Jiangang, Li Guohua, Zhu Kongshuo, Zhao Jiexin, Ma Xiaoguang. Design and Simulation of the Optical System of LED Solar Simulator[J]. Laser & Optoelectronics Progress, 2013, 50(10): 102204.
PDF全文
