中国激光, 2014, 41 (6): 0603002, 网络出版: 2014-05-14   

激光加工硬质合金刀具表面微织构的试验研究

Experimental Research on Laser Machining of Surface Micro-Textures of Carbide Cutting Tool
作者单位
南京航空航天大学机电学院, 江苏 南京 210016
摘要
表面微织构刀具对改善刀工摩擦接触状态、刀具磨损及抗黏附性方面具有积极作用。利用光纤激光器,在硬质合金刀具前刀面上进行了微沟槽和微圆坑织构的加工对比试验,分析了平均输出功率、脉冲频率和离焦量等不同工艺参数对微织构的形貌和质量的影响。试验结果表明:随着平均输出功率和脉冲频率的增加,微沟槽宽度和微圆坑直径分别表现出增大和减小的趋势;采用较大的脉冲频率、平均输出功率能够改善微织构的形貌和质量;当负离焦量在-1~-1.4 mm范围时,在沟槽底部获得了更加均匀光滑的形貌。
Abstract
Cutting tools with surface micro-textures have positive effects on reducing friction, improving the wear resistance and anti-adhesion. The comparative trials are carried out in fiber laser machining of micro-grooves and micro-holes on the rake face of cemented carbide cutting tool. The effects of various processing parameters on topography and quality of micro-textures are analyzed, such as average output power, pulse repetition rate, defocusing distance. The experimental results show that the width of micro-grooves and the diameter of micro-holes have an increasing and a decreasing tendency with the increase of the average output power and the pulse repetition rate respectively. Furthermore, the morphologies of micro-textures can be improved by the larger average output power and the pulse repetition rate. It is observed that bottom morphologies of the micro-grooves is more uniform and smoother when the defocusing distance ranges from -1~-1.4 mm.

苏永生, 李亮, 何宁, 赵威. 激光加工硬质合金刀具表面微织构的试验研究[J]. 中国激光, 2014, 41(6): 0603002. Su Yongsheng, Li Liang, He Ning, Zhao Wei. Experimental Research on Laser Machining of Surface Micro-Textures of Carbide Cutting Tool[J]. Chinese Journal of Lasers, 2014, 41(6): 0603002.

本文已被 5 篇论文引用
被引统计数据来源于中国光学期刊网
引用该论文: TXT   |   EndNote

相关论文

加载中...

关于本站 Cookie 的使用提示

中国光学期刊网使用基于 cookie 的技术来更好地为您提供各项服务,点击此处了解我们的隐私策略。 如您需继续使用本网站,请您授权我们使用本地 cookie 来保存部分信息。
全站搜索
您最值得信赖的光电行业旗舰网络服务平台!