中国激光, 2014, 41 (8): 0803004, 网络出版: 2014-06-13   

聚晶金刚石表面微结构的激光加工实验

Experiment of Laser Machining of Micro-Structures on the Surface of Polycrystalline Diamond
作者单位
南京航空航天大学机电学院, 江苏 南京 210016
摘要
表面微结构刀具对改善刀工摩擦接触状态、刀具磨损及抗黏附性方面具有积极作用。在聚晶金刚石刀具表面,利用光纤激光器进行了不同形状的微结构加工,并分析了扫描速度、脉冲频率和平均输出功率等不同工艺参数对微沟槽形貌和质量的影响。实验结果表明:随着平均输出功率和脉冲频率的增加,微沟槽宽度和深度分别表现出增大和减小的趋势;采用较小的扫描速度和和较大的平均输出功率能够降低沟槽侧壁粗糙度,改善微沟槽的形貌质量。
Abstract
Cutting tools with surface micro-structures have positive effects on reducing friction, improving the wear resistance and anti-adhesion. Micro-structures of different shapes are fabricated using a fiber laser on the surface of polycrystalline diamond tool. The effects of various processing parameters on topography and quality of micro-grooves are analyzed, such as scanning speed, pulse repetition rate, average output power, etc. The experimental results show that the width and depth of micro-grooves have an increasing and a decreasing tendency with the increase of the average output power and the pulse repetition rate respectively. Furthermore, the surface roughness of micro-grooves sidewall and topography quality of micro-grooves can be improved by the higher average output power and the lower scanning speed.

苏永生, 李亮, 何宁, 赵威. 聚晶金刚石表面微结构的激光加工实验[J]. 中国激光, 2014, 41(8): 0803004. Su Yongsheng, Li Liang, He Ning, Zhao Wei. Experiment of Laser Machining of Micro-Structures on the Surface of Polycrystalline Diamond[J]. Chinese Journal of Lasers, 2014, 41(8): 0803004.

本文已被 3 篇论文引用
被引统计数据来源于中国光学期刊网
引用该论文: TXT   |   EndNote

相关论文

加载中...

关于本站 Cookie 的使用提示

中国光学期刊网使用基于 cookie 的技术来更好地为您提供各项服务,点击此处了解我们的隐私策略。 如您需继续使用本网站,请您授权我们使用本地 cookie 来保存部分信息。
全站搜索
您最值得信赖的光电行业旗舰网络服务平台!