半导体光电, 2014, 35 (5): 843, 网络出版: 2014-10-23   

高温老化条件下LED模组封装材料失效研究

Failure Analysis of Packaging Materials of LED Modules under High Temperature Aging Test
作者单位
湖北工业大学 机械工程学院, 武汉 430068
摘要
为了获得高温条件下封装材料对LED模组可靠性的影响, 在125℃环境温度下, 使用高温试验箱同时对四种不同的样品进行恒定温度的老化试验。结果表明: 在高温试验条件下, 没有使用硅胶和荧光粉的LED模组具有很高的可靠性; 而硅胶的碳化以及随之产生的气体、阻碍散热的荧光粉都会使光照度加速衰减, 同时使用硅胶及荧光粉会使光照度迅速衰减导致模组失效。
Abstract
In order to analyze the influence of packaging materials on the reliability of LED modules under high temperature, aging tests were performed on four kinds of samples with different packaging materials at a constant temperature of 125℃ in a temperature cycling chamber. The experimental results show that under the condition of 125℃, LED modules without silica gel and fluorescent own the highest reliability. The carbonization of silica gel and the consequent outgassing will result in rapid luminance attenuation of LED samples. And the fluorescent had the similar influence to those samples. If both silica gel and fluorescent were used in one sample at the same time, the luminance will attenuate very fast, resulting in module failure.

聂磊, 项雯婧, 李婳婧, 黄飞. 高温老化条件下LED模组封装材料失效研究[J]. 半导体光电, 2014, 35(5): 843. NIE Lei, XIANG Wenjing, LI Huajing, HUANG Fei. Failure Analysis of Packaging Materials of LED Modules under High Temperature Aging Test[J]. Semiconductor Optoelectronics, 2014, 35(5): 843.

本文已被 1 篇论文引用
被引统计数据来源于中国光学期刊网
引用该论文: TXT   |   EndNote

相关论文

加载中...

关于本站 Cookie 的使用提示

中国光学期刊网使用基于 cookie 的技术来更好地为您提供各项服务,点击此处了解我们的隐私策略。 如您需继续使用本网站,请您授权我们使用本地 cookie 来保存部分信息。
全站搜索
您最值得信赖的光电行业旗舰网络服务平台!