应用激光, 2014, 34 (5): 377, 网络出版: 2014-12-08   

选择性激光烧结聚苯乙烯拉伸强度研究

Research on Tensile Strength of Selective Laser Sintering Polystyrene
作者单位
苏州大学机电工程学院, 江苏 苏州 215021
摘要
以聚苯乙烯粉末为原料, 采用选择性激光烧结技术成型矩形试件, 探讨了激光功率、扫描速度、单层厚度、扫描间距以及粉底温度对拉伸强度的影响。结果表明:工艺参数对拉伸强度具有较大影响, 其中, 激光功率对拉伸强度的影响最大, 粉底温度的影响最小。拉伸强度随着激光功率的增加呈现出增大的趋势, 拉伸强度随着扫描速度的增大而降低。
Abstract
Polystyrene (PS)powder was sintered to rectangle specimen by using selective laser sintering (SLS). The effects of laser power, scanning speed, layer thickness, hatch spacing and temperature of powder on tensile strength ratio were studied. The results showed that the effects of process parameters have large infiuence on the tensile strength. The laser power influences tensile strength most meanwhile the temperature of powder after least. The tensile strength shows growth trend with increasing of laser power while shows reduce trend with increasing of scanning speed.

王传洋, 陈瑶, 董渠. 选择性激光烧结聚苯乙烯拉伸强度研究[J]. 应用激光, 2014, 34(5): 377. Wang Chuanyang, Chen Yao, Dong Qu. Research on Tensile Strength of Selective Laser Sintering Polystyrene[J]. APPLIED LASER, 2014, 34(5): 377.

本文已被 2 篇论文引用
被引统计数据来源于中国光学期刊网
引用该论文: TXT   |   EndNote

相关论文

加载中...

关于本站 Cookie 的使用提示

中国光学期刊网使用基于 cookie 的技术来更好地为您提供各项服务,点击此处了解我们的隐私策略。 如您需继续使用本网站,请您授权我们使用本地 cookie 来保存部分信息。
全站搜索
您最值得信赖的光电行业旗舰网络服务平台!