强激光与粒子束, 2014, 26 (10): 102002, 网络出版: 2014-12-08   

准球型负载装配技术

Assembly technology of quasi-spherical load
作者单位
中国工程物理研究院 激光聚变研究中心, 四川 绵阳 621900
摘要
根据准球型负载的结构和材料特点及其装配过程中对精度的要求,开展了丝阵和泡沫微球装配技术的研究。并根据准球型负载的丝阵装配技术,进行了丝阵直径约8 mm、钨丝直径约10 μm的丝阵负载装配;利用泡沫微球装配系统进行了直径约3 mm微球与直径约200 μm玻璃纤维的精确装配。准球型负载已成功应用于准球型负载物理试验中,并取得了较为理想的试验结果,有望在惯性约束聚变(ICF)物理试验及准球型负载物理试验中发挥更大的作用。
Abstract
Based on the structural and material characteristics and requirements of the accuracy of quasi-spherical load in the process of assembly, the study on the assembly process of microspheres and wire array was carried out. And according to the assembly process of wire array, we finished the assembly of wire array with 8 mm diameter, and tungsten wire with 10 μm diameter; the assembly of a micro ball with 3 mm diameter and glass fiber with 200 μm diameter was performed on a foam microsphere micro-assembly system. Quasi-spherical load was successfully applied in physical tests of quasi-spherical load, and satisfactory results were achieved. It is expected to play a greater role in inertial confinement fusion (ICF) and physical tests of the quasi-spherical load in the future.

余斌, 周秀文, 朱晔, 杨波, 刘旭东, 杨毅, 方瑜, 王朝阳, 牛高. 准球型负载装配技术[J]. 强激光与粒子束, 2014, 26(10): 102002. Yu Bin, Zhou Xiuwen, Zhu Ye, Yang Bo, Liu Xudong, Yang Yi, Fang Yu, Wang Chaoyang, Niu Gao. Assembly technology of quasi-spherical load[J]. High Power Laser and Particle Beams, 2014, 26(10): 102002.

本文已被 1 篇论文引用
被引统计数据来源于中国光学期刊网
引用该论文: TXT   |   EndNote

相关论文

加载中...

关于本站 Cookie 的使用提示

中国光学期刊网使用基于 cookie 的技术来更好地为您提供各项服务,点击此处了解我们的隐私策略。 如您需继续使用本网站,请您授权我们使用本地 cookie 来保存部分信息。
全站搜索
您最值得信赖的光电行业旗舰网络服务平台!