发光学报, 2014, 35 (12): 1474, 网络出版: 2014-12-08   

高功率半导体巴条激光器的热特性分析

Thermal Analysis of High Power Semiconductor Laser Bar
作者单位
中国科学院苏州生物医学工程技术研究所 半导体光电子技术研究室, 江苏 苏州215163
摘要
对采用5层叠焊的微通道无氧铜热沉冷却的巴条激光器进行了流体动力学(CFD)分析。建立了条宽10 mm、腔长1.5 mm巴条芯片的流固耦合共轭传热模型, 得到了不同流量水冷下激光器的热阻和压力损失曲线。分析了300 mL/min水流时, 激光器的温度分布和冷却水的流动性能。实验条件下, 测试了该微通道热沉封装的808 nm巴条激光器的热阻和压力损失。数值计算和实验测试所得的结果一致, 在300 mL/min水流下, 巴条热阻为0.38 ℃/W, 在温度不高于70 ℃时可满足连续模式下90 W的散热要求。
Abstract
Computational fluid dynamics (CFD) simulation and experimental analysis are presented for a semiconductor laser bar, which is cooled by a 5-layer oxygen-free copper micro-channel heat sink. A fluid-solid coupling conjugate heat transfer model is built for the micro-channel cooler and 10 mm-wide, 1.5 mm-cavities long bar. The curves of thermal resistance and pressure drop to flowing rate are plotted. The temperature of the laser bar and the characteristic of the cooling water are studied at 300 mL/min flowing rate. An experimental testing is performed for the thermal resistance and pressure drop of an 808 nm laser, which is packaged with the micro-channel cooler. The simulation results consistent with experiment. In the flowing rate of 300 mL/min, the thermal resistance is 0.38 ℃/W, which can dissipate a continuous 90 W heat below 70 ℃.

李江, 李超, 徐昊, 章强, 周旻超. 高功率半导体巴条激光器的热特性分析[J]. 发光学报, 2014, 35(12): 1474. LI Jiang, LI Chao, XU Hao, ZHANG Qiang, ZHOU Min-chao. Thermal Analysis of High Power Semiconductor Laser Bar[J]. Chinese Journal of Luminescence, 2014, 35(12): 1474.

本文已被 4 篇论文引用
被引统计数据来源于中国光学期刊网
引用该论文: TXT   |   EndNote

相关论文

加载中...

关于本站 Cookie 的使用提示

中国光学期刊网使用基于 cookie 的技术来更好地为您提供各项服务,点击此处了解我们的隐私策略。 如您需继续使用本网站,请您授权我们使用本地 cookie 来保存部分信息。
全站搜索
您最值得信赖的光电行业旗舰网络服务平台!