光学仪器, 2014, 36 (5): 416, 网络出版: 2014-12-26   

一种长工作距视频显微镜光学系统设计

The optical system design of long working distance video microscope
作者单位
长春理工大学 光电工程学院, 吉林 长春 130022
摘要
视频显微镜随着CCD探测器的发展得到了广泛应用。但其工作距离受以往折射式光学系统的限制, 工作距离较短, 影响了其应用范围。分析了长工作距视频显微镜的像差特点, 并结合其长工作距离, 利用光学设计软件Zemax进行光学成像效果的仿真, 给出了工作距84.5 mm, 数值孔径0.16, 光学放大倍率5倍, 物方线视场1.2 mm, 分辨率7.7 μm的折反射式显微镜光学系统的设计结果。
Abstract
The video microscope has been widely used in many applications with the development of CCD detector. The working distance of the video microscope is short due to the limitation of the catadioptric configuration and it affects its application. In this paper, we focus on the analysis of aberration characteristics which is influenced by the long working distance. At last, we use optical design software Zemax to simulate the optical effectiveness and give design results of cassegrain system where the working distance is 84.5 mm, the numerical aperture is 0.16, the optical magnification is 5, the field number is 1.2 mm and the resolution is 7.7 μm.

高健, 向阳, 尹志东, 周丹. 一种长工作距视频显微镜光学系统设计[J]. 光学仪器, 2014, 36(5): 416. GAO Jian, XIANG Yang, YIN Zhidong, ZHOU Dan. The optical system design of long working distance video microscope[J]. Optical Instruments, 2014, 36(5): 416.

本文已被 1 篇论文引用
被引统计数据来源于中国光学期刊网
引用该论文: TXT   |   EndNote

相关论文

加载中...

关于本站 Cookie 的使用提示

中国光学期刊网使用基于 cookie 的技术来更好地为您提供各项服务,点击此处了解我们的隐私策略。 如您需继续使用本网站,请您授权我们使用本地 cookie 来保存部分信息。
全站搜索
您最值得信赖的光电行业旗舰网络服务平台!