首页 > 论文 > 激光技术 > 38卷 > 6期(pp:764-770)

激光纳米表面工程技术

Technology of laser nano-material surface engineering

  • 摘要
  • 论文信息
  • 参考文献
  • 被引情况
  • PDF全文
分享:

摘要

表面工程技术、纳米技术和激光技术结合产生了激光纳米表面工程技术。总结了相关的各种主要实现方法。通过对大量现有文献的总结和分析研究可知, 可以通过这些激光处理方式对材料表面进行自纳米化或者熔敷制备含纳米颗粒的涂层。

Abstract

The laser nano-material surface engineering (LNMSE) technology is established by combining surface engineering technology, nano technology and laser technology. All the important laser surface treatment methods of LNMSE were introduced. The summarization, analysis and research of the existing literature prove that laser surface treatment methods can get the nano-crystallization surface and get the cladding surface with nano-particles.

投稿润色
补充资料

中图分类号:TG665

DOI:10.7510/jgjs.issn.1001-3806.2014.06.009

所属栏目:综述与评述

基金项目:江苏省光子制造科学与技术重点实验室开放基金资助项目(GZ201301);中央高校基本科研业务费专项资金资助项目;江苏省普通高校研究生科研创新计划资助项目(CXLX13_168)

收稿日期:2013-12-19

修改稿日期:2014-02-17

网络出版日期:--

作者单位    点击查看

胡增荣:南京航空航天大学 机电学院, 南京 210016苏州大学 城市轨道交通学院, 苏州 215131
童国权:南京航空航天大学 机电学院, 南京 210016
陈长军:苏州大学 城市轨道交通学院, 苏州 215131
郭华锋:南京航空航天大学 机电学院, 南京 210016
周亮:苏州大学 机电工程学院, 苏州 215131
徐家乐:江苏科技大学 机械工程学院, 镇江 212003

联系人作者:胡增荣(meegqtong@nuaa.edu.cn)

备注:胡增荣(1975-), 男, 博士研究生, 副教授,研究领域为先进制造技术。

【1】LU K, LU J. Surface nanocrystallization of metallic materials presentation of the concept behind a new approach [J]. Journal of Material Science & Technology, 1999,15(3):193-197.

【2】XU B Sh, OU W Zh, MA Sh N, et al. Nano-materials surface engineering[J]. China Mechanical Engineering, 2000,11(6):707-712(in Chinese).

【3】XU B Sh, LIU Sh C, LIANG X B. Progress and prospect of nano-materials surface engineering[J].Chinese Jornal of Mechanical Engineering,2003,10(10):21-26(in Chinese).

【4】LIU G, YONG X P, LU K. The current situation of researches of surface-nanocrystallization on metallic materials[J].China Surface Engineering,2001,52(3):1-5(in Chinese).

【5】LU K, LU J. Nanostructured surface layer on metallic materials induced by surface mechanical attrition treatment[J]. Material Science and Engineering, 2004, A38(7): 375-377.

【6】LIU G, ZHOU L. Surface nanocrystallization technique of the engineering metallic material[J].Nanoscience & Technology, 2006,3 (1): 51-56(in Chinese).

【7】WEN H Y. Study of the laser surface treatment of Inconel718 alloy[D]. Qinhuangdao: Yanshan University, 2010: 39-40(in Chinese).

【8】KANNATEY-ASIBU E.Principles of laser materials processing [M].Hoboken, NJ,USA: Wiley,2009:594-595.

【9】WANG Ch T, ZHOU H, LIN P Y, et al. Fabrication of nano-sized grains by pulsed laser surface melting[J]. Journal of Physics,2010,D43(9):095402.

【10】ZHANG P, ZHOU H, WANG Ch T, et al. Wear properties of H13 with micron scale and nano scale grains bionic units processed by laser remelting [J].Optics & Laser Technology,2013,54:219-224.

【11】CHEN S Y,DONG J, CHEN J, et al. Nano-particles reinforced Co-based gradient coating with high wear-resistance prepared in-situ by laser on surface of crystallizer copper alloy[J].Chinese Journal of Lasers,2011,38(7):0703006(in Chinese).

【12】NIU X, CHAO M J, WANG W L, et al. In situ synthesized NbC particulate reinforced Ni- based composite coatings by laser cladding[J].Chinese Journal of Lasers,2006,33(7):987-992(in Chinese).

【13】XU J, LI Z Y, ZHU W H, et al.Investigation on microstructural characterization of in situ TiB/Al metal matrix composite by laser cladding [ J ]. Materials Science and Engineering,2007,A447(1/2):307-313.

【14】LI J NG,GONG Sh L, LIU HAO, et al. Physical properties and microstructures of Fe3Al matrix laser amorphous-nanocrystals reinforced coating[J].Materials Letters,2013,92:235-238.

【15】ZHANG G J,DAI J Q,WANG H P, et al. Research on laser cladded nickel based nanometer tungsten carbide composite coatings[ J] . Transactions of Materials and Heat Treatment, 2004, 25(5) : 1004-1008.

【16】WANG H P, ZHANG G J, DAI J Q, et al. The structure of wcnano/Ni composite coating by laser cladding[J].Applied Laser,2005,25(6):369- 394.

【17】MONTROSS C S, WEI T, YE L, et al. Laser shock processing and its effects on microstructure and properties of metal alloys: a review [J]. International Journal of Fatigue,2002,24(10):1021-1036.

【18】NIE X F, HE W F, LI Q P, et al. Improvement of structure and mechanical properties of TC6 titanium alloy with laser shock peening[J].High Power Laser and Partical Beams, 2013,25(5):1115-1119(in Chinese).

【19】LU J Z. Investigation of laser shock processing on the mechanical properties and micro-plastic deformation mechanism of LY2 aluminum alloy[D].Zhenjiang: Jiangsu University, 2010:64-72(in Chinese).

【20】XIONG Ch, LI Zh F, WANG X D. Thermal stability of microstructure of laser shock processed TC11 titanium alloy[J].Jouranl of Plasticity Engineering,2013,20(3):116-120(in Chinese).

引用该论文

HU Zengrong,TONG Guoquan,CHEN Changjun,GUO Huafeng,ZHOU Liang,XU Jiale. Technology of laser nano-material surface engineering[J]. Laser Technology, 2014, 38(6): 764-770

胡增荣,童国权,陈长军,郭华锋,周亮,徐家乐. 激光纳米表面工程技术[J]. 激光技术, 2014, 38(6): 764-770

被引情况

【1】胡增荣,幺 博,童国权,陈长军,张 敏,郑祖山,徐家乐,郭华锋,王晓南. 激光熔敷镍石墨烯立方氮化硼涂层的耐磨性能. 强激光与粒子束, 2017, 29(2): 29001--1

您的浏览器不支持PDF插件,请使用最新的(Chrome/Fire Fox等)浏览器.或者您还可以点击此处下载该论文PDF