强激光与粒子束, 2014, 26 (12): 125103, 网络出版: 2015-01-08  

325MHz超导腔输入耦合器镀铜层厚度的实验研究

Copper layer thickness for 325 MHz superconducting cavity input couplers
作者单位
1 中国科学院大学 物理学院, 北京 100049
2 中国科学院 高能物理研究所 加速器中心, 北京 100049
摘要
通过对工作在325 MHz、镀铜厚度分别为10,20,30 μm的耦合器外导体进行高功率测试,研究了超导腔输入耦合器外导体内壁镀铜层厚度与漏热的依赖关系,目的在于寻找最优化的铜层厚度来降低超导腔输入耦合器的低温漏热。实验结果表明,20 μm铜层的耦合器具有较低的动态损耗。综合考虑静态损耗与动态损耗,则20 μm铜层厚度为最优化的铜层厚度。
Abstract
This article studies the relationship between the copper layer thickness of the outer conductor of superconducting cavity input coupler and the heat leak.We compared copper coatings of 10,20,30 μm respectively of 325 MHz coupler through high power test and aimed to find the optimum thickness of the copper plating layer in order to decrease the cryogenic heat load . The experimental results show that 20 μm layer has lower dynamic heat leak. Considering both static heat leak and dynamic heat leak, the 20 μm thickness of copper layer is the optimum one.

陈旭, 谷魁祥, 彭应华, 马强, 黄彤明, 林海英, 潘卫民. 325MHz超导腔输入耦合器镀铜层厚度的实验研究[J]. 强激光与粒子束, 2014, 26(12): 125103. Chen Xu, Gu Kuixiang, Peng Yinghua, Ma Qiang, Huang Tongming, Lin Haiying, Pan Weimin. Copper layer thickness for 325 MHz superconducting cavity input couplers[J]. High Power Laser and Particle Beams, 2014, 26(12): 125103.

关于本站 Cookie 的使用提示

中国光学期刊网使用基于 cookie 的技术来更好地为您提供各项服务,点击此处了解我们的隐私策略。 如您需继续使用本网站,请您授权我们使用本地 cookie 来保存部分信息。
全站搜索
您最值得信赖的光电行业旗舰网络服务平台!