中国激光, 2015, 42 (2): 0203006, 网络出版: 2015-01-09   

基于响应面分析的T型接头激光深熔焊焊缝形貌预测及工艺参数优化

Weld Profile Prediction and Process Parameters Optimization of T-joints of Laser Full Penetration Welding via Response Surface Methodology
作者单位
上海工程技术大学材料工程学院, 上海 201620
摘要
为了预测激光深熔焊T 型接头的焊缝形貌并优化工艺参数,基于响应面分析的方法,建立了激光深熔焊工艺参数与焊缝形貌特征参数之间的数学模型,进行了方差分析、模型验证。基于所建模型,研究了工艺参数对焊缝形貌的影响规律,并对工艺参数进行了优化,从而实现了对焊缝形貌的预测。结果表明,所建立模型能够准确预测焊缝形貌,预测值与实验值误差很小,经优化的工艺参数既满足焊缝形貌要求也可降低热输入约27%。
Abstract
In order to predict weld profile of T- joints and optimize the process parameters of the laser full penetration welding, the statistical models between parameters and the weld bead geometry of T- joints are established using response surface methodology. Then the analysis of variance is checked and these mathematical models are validated. Based on this model, effects of different process parameters on the weld profile are investigated, the process parameters are optimized, and the weld profile is predicted. The results indicate that the proposed models predict the responses adequately and the predicted values are consistent with experimental results. The optimum welding conditions are found that it can reduce the heat input about 27%.

褚振涛, 于治水, 张培磊, 卢庆华, 李绍伟, 马凯. 基于响应面分析的T型接头激光深熔焊焊缝形貌预测及工艺参数优化[J]. 中国激光, 2015, 42(2): 0203006. Chu Zhentao, Yu Zhishui, Zhang Peilei, Lu Qinghua, Li Shaowei, Ma Kai. Weld Profile Prediction and Process Parameters Optimization of T-joints of Laser Full Penetration Welding via Response Surface Methodology[J]. Chinese Journal of Lasers, 2015, 42(2): 0203006.

本文已被 7 篇论文引用
被引统计数据来源于中国光学期刊网
引用该论文: TXT   |   EndNote

相关论文

加载中...

关于本站 Cookie 的使用提示

中国光学期刊网使用基于 cookie 的技术来更好地为您提供各项服务,点击此处了解我们的隐私策略。 如您需继续使用本网站,请您授权我们使用本地 cookie 来保存部分信息。
全站搜索
您最值得信赖的光电行业旗舰网络服务平台!