中国激光, 2015, 42 (2): 0206001, 网络出版: 2015-01-09   

激光钕玻璃包边残余应力实验研究

Experiment Investigation on Residual Stress of Nd:Glass Edge Cladding
作者单位
1 中国科学院上海光学精密机械研究所, 上海 201800
2 中国科学院大学, 北京 100049
摘要
为减少放大自发辐射和抑制寄生震荡,需在激光钕玻璃片侧面粘接一层吸收介质包边玻璃,其中,包边残余应力是粘接的一个重要参数。详细描述了激光钕玻璃与包边玻璃在包边粘接过程中粘接界面附近残余应力的来源,实验讨论分析了精密退火、加工、包边粘接等对界面附近残余应力的影响。结果表明,退火过程中的边缘应力对粘接界面附近残余应力影响比较大,且包边面加工面型匹配越差,则界面附近残余应力越大,而低收缩率和低模量的粘接胶对界面附近的残余应力影响较小。
Abstract
In order to decrease the reflectivity of amplified spontaneous emission, suppress parasitic oscillations, an edge cladding that absorbs the reflected or scattered light is required. The residual stress of the edge cladding is an important parameter for bonding. The influence factors on the residual stress birefringence near the bonding interface are described in detail. The effects of fine annealing, polishing and bonding are investigated. The results indicate that the effects of the edge stress of samples on the residual stress near the bonded interface are in evidence; the poorer of polishing surface flatness makes, the larger birefringence near the cladding interface; and the low shrink percentage and modulus adhesive polymer have less impact for the residual stress near the interface.

胡俊江, 孟涛, 温磊, 陈尤阔, 陈辉宇, 程继萌, 唐景平, 王标, 陈树彬, 陈伟, 胡丽丽. 激光钕玻璃包边残余应力实验研究[J]. 中国激光, 2015, 42(2): 0206001. Hu Junjiang, Men Tao, Wen Lei, Chen Youkuo, Chen Huiyu, Chen Jimeng, Tang Jingping, Wang Biao, Chen Shubin, Chen Wei, Hu Lili. Experiment Investigation on Residual Stress of Nd:Glass Edge Cladding[J]. Chinese Journal of Lasers, 2015, 42(2): 0206001.

本文已被 1 篇论文引用
被引统计数据来源于中国光学期刊网
引用该论文: TXT   |   EndNote

相关论文

加载中...

关于本站 Cookie 的使用提示

中国光学期刊网使用基于 cookie 的技术来更好地为您提供各项服务,点击此处了解我们的隐私策略。 如您需继续使用本网站,请您授权我们使用本地 cookie 来保存部分信息。
全站搜索
您最值得信赖的光电行业旗舰网络服务平台!