光学 精密工程, 2014, 22 (12): 3354, 网络出版: 2015-01-13
均压槽对空气静压轴承微振动的影响
Effect of equalizing groove on small vibration of aerostatic bearings
摘要
由于空气静压轴承工作过程中的微振动制约了它在超精密设备中的应用, 本文对空气静压轴承的动态特性进行了实验分析, 并提出用带均压槽的结构设计来解决上述问题。运用有限元软件对空气静压轴承进行仿真, 得到了空气静压轴承的各项性能参数。分析了微振动产生的原因并提出在空气静压轴承工作表面增加均压槽来有效抑制空气静压轴承的微振动的方法。通过实验对提出方法进行了验证, 结果显示计算结果与实验具有较好的一致性。 实验表明通过增加均压槽的方式可以将轴承微振动降低80%, 有效地提高了空气轴承的稳定性和运行精度。本研究为抑制空气轴承微振动和提高整个机床设备精度做出了有益探索。
Abstract
As the very small vibration of an aerostatic bearing limits its applications in ultra-precision machining, this paper analyzes experimentally the dynamical characteristics of the aerostatic bearing and proposes a structure design with an equalizing groove to solve the problem mentioned above. To realize the mechanical characteristics of aerostatic bearings, the analytical model was set up by using the finite element analysis software FLUENT and the performance parameters of the aerostatic bearing were obtained. The mechanism for the occurrence of small vibration was analyzed and the methods to add an equalizing groove on the surface of the aerostatic bearing to reduce the small vibration were proposed. The experiments were performed to verify the proposed method and the results show that the experiment results are good consistent with the analysis results. It indicates that the small vibration can be successfully suppressed by 80% with the proposed equalizing groove, which improves the stability and operation accuracy of the aerostatic bearing and is a useful exploring for suppressing the small vibration of aerostatic bearings and improving the accuracy of whole machine tool.
陈琦, 陈斌, 蔡黎明. 均压槽对空气静压轴承微振动的影响[J]. 光学 精密工程, 2014, 22(12): 3354. CHEN Qi, CHEN Bin, CAI Li-ming. Effect of equalizing groove on small vibration of aerostatic bearings[J]. Optics and Precision Engineering, 2014, 22(12): 3354.