强激光与粒子束, 2015, 27 (2): 024156, 网络出版: 2015-02-15  

辐照还原法制备Au掺杂MF气凝胶

Fabrication of Au-doped melamine-formaldehyde aerogel by radiation method
作者单位
1 中国工程物理研究院 激光聚变研究中心, 四川 绵阳 621900
2 复旦大学 现代物理研究所, 上海 200433
3 中国工程物理研究院 核物理与化学研究所, 四川 绵阳 621900
摘要
利用辐照还原法在500 kGy辐照剂量下制备了Au掺杂MF有机气凝胶。通过X射线衍射(XRD)、能量色散光谱仪(EDX)和透射电子显微镜(TEM)测试证实了辐照法成功地制备出Au掺杂MF有机气凝胶复合物。EDX和TEM照片表明辐照处理后Au纳米颗粒均匀地分布在MF气凝胶骨架中, 并且Au纳米颗粒的平均尺寸为5.8 nm。N2吸附数据分析表明掺入Au纳米颗粒后, MF气凝胶的比表面积、总孔体积、微孔体积和介孔体积都有所下降。
Abstract
The Au-doped melamine-formaldehyde(MF) aerogel was fabricated by γ-irradiation of AuCl3 solution with MF aerogel monoliths impregnated. The obtained samples were characterized by X-ray diffraction (XRD), energy dispersive spectroscopy (EDX) and transmission electron microscope (TEM). The results show that the well distributed Au nanoparticles presented in MF aerogels and the average particle size was 5.8 nm after irradiation. The nitrogen adsorption characterization reveals the introduction of Au nanoparticles produced a reduction of the surface areas and total, micropore and mesopore volumes.

钟铭龙, 王朝阳, 付志兵, 黄玮, 唐永建. 辐照还原法制备Au掺杂MF气凝胶[J]. 强激光与粒子束, 2015, 27(2): 024156. Zhong Minglong, Wang Chaoyang, Fu Zhibing, Huang Wei, Tang Yongjian. Fabrication of Au-doped melamine-formaldehyde aerogel by radiation method[J]. High Power Laser and Particle Beams, 2015, 27(2): 024156.

关于本站 Cookie 的使用提示

中国光学期刊网使用基于 cookie 的技术来更好地为您提供各项服务,点击此处了解我们的隐私策略。 如您需继续使用本网站,请您授权我们使用本地 cookie 来保存部分信息。
全站搜索
您最值得信赖的光电行业旗舰网络服务平台!