光学学报, 2015, 35 (4): 0413001, 网络出版: 2015-04-03   

飞秒激光在掺Er3+“无水”氟碲酸盐玻璃中写入光波导

Er3+: ‘Water-free’ Fluorotellurite Glass Waveguides Written by Femtosecond Laser
作者单位
1 中国科学院西安光学精密机械研究所瞬态光学与光子技术国家重点实验室, 陕西 西安 710119
2 中国科学院大学, 北京 100049
摘要
利用重复频率为1 kHz,中心波长为800 nm,脉冲宽度为120 fs的超短脉冲激光在掺Er3+“无水”氟碲酸盐玻璃中利用狭缝整形技术横向刻写了I类和压低圆包层波导。在对波导刻写参数进行系统研究后,得到了两组导光模式较优的波导。利用波导的近场模式强度分布重构了其折射率分布图,得到两类波导最大的折射率增加量分别为1×10-4和1.9×10-4。用散射法测试了I类波导的传输损耗为1.04 dB/cm;通过测量插入损耗得到压低圆包层波导的传输损耗小于1.88 dB/cm。因此,利用飞秒激光在掺Er3+“无水”氟碲酸盐玻璃中刻写的光波导,在集成激光光源制作方面具有很好的应用前景。
Abstract
By femtosecond laser with repetition rate of 1 kHz, central wavelength of 800 nm and pulse width of 120 fs, Type I (single line) and depressed circular cladding waveguides in Er3+ doped‘water-free’fluorotellurite glass are transversely written with slit shaping technology, respectively. The impact of the processing conditions on the waveguides′ formation is systematically studied, and the waveguides with better guiding mode are obtained. Refractive index profile is reconstructed by intensity distribution of the near-field mode, and the largest positive refractive index change for Type I waveguide is about 1×10- 4, slightly smaller than that (1.9×10- 4) of depressed cladding waveguide. By using the scattering technique, the propagation loss of Type I waveguide is about 1.04 dB/cm. The loss of depressed cladding waveguide is less than 1.88 dB/cm by measuring insertion loss. Therefore, Er3+ doped ‘water-free’fluorotellurite glass waveguides inscribed by femtosecond laser are promising candidates for the development of integrated laser resources.

刘爽, 唐文龙, 程光华. 飞秒激光在掺Er3+“无水”氟碲酸盐玻璃中写入光波导[J]. 光学学报, 2015, 35(4): 0413001. Liu Shuang, Tang Wenlong, Cheng Guanghua. Er3+: ‘Water-free’ Fluorotellurite Glass Waveguides Written by Femtosecond Laser[J]. Acta Optica Sinica, 2015, 35(4): 0413001.

本文已被 2 篇论文引用
被引统计数据来源于中国光学期刊网
引用该论文: TXT   |   EndNote

相关论文

加载中...

关于本站 Cookie 的使用提示

中国光学期刊网使用基于 cookie 的技术来更好地为您提供各项服务,点击此处了解我们的隐私策略。 如您需继续使用本网站,请您授权我们使用本地 cookie 来保存部分信息。
全站搜索
您最值得信赖的光电行业旗舰网络服务平台!