光学技术, 2015, 41 (1): 3, 网络出版: 2015-04-14   

二次校准光纤光栅温度传感器

High accuracy FBG temperature sensor based on quadratic polynomial fitting
作者单位
北京理工大学 机械与车辆学院激光微纳制造研究所, 北京 100081
摘要
为了提高光纤布拉格光栅(FBG)温度传感器的测温精度,提出了一种新型的光纤布拉格光栅(FBG)温度传感器的封装方法,并采用二次多项式拟合的方式标定该温度传感器.新的封装方法可以消除FBG温度传感器存在的应力交叉敏感,新的标定方式可以极大地提高光纤温度传感器的测温精度.通过对比光纤温度传感器的线性拟合和二次多项式拟合测温结果,表明这种封装方法结合二次多项式标定使得光纤温度传感器具有很好的稳定性和重复性.在0℃~80℃的温度范围内,曲线拟合度在0.9999以上,测温误差不超过0.13℃,能够满足实际工程应用的需求.
Abstract
In order to improve the accuracy of the FBG temperature sensor,a new packaging method is proposed and the detected temperatures are fitted by quadratic polynomial function.The new packaging method can eliminate the cross-sensitivity of stress.Linear fitting and quadratic polynomial fitting are applied respectively,and the sensor demonstrates good stability and repeatability by quadratic polynomial fitting.The degree of the quadratic polynomial fitting is greater than 0.9999 and the temperature error is less than 0.13℃ in the temperature range of 0℃~80℃.The proposed sensor can be applied in engineering practice with good accuracy and reliability.

张飞, 王素梅, 刘达, 曹志涛. 二次校准光纤光栅温度传感器[J]. 光学技术, 2015, 41(1): 3. ZHANG Fei, WANG Sumei, LIU Da, CAO Zhitao. High accuracy FBG temperature sensor based on quadratic polynomial fitting[J]. Optical Technique, 2015, 41(1): 3.

本文已被 3 篇论文引用
被引统计数据来源于中国光学期刊网
引用该论文: TXT   |   EndNote

相关论文

加载中...

关于本站 Cookie 的使用提示

中国光学期刊网使用基于 cookie 的技术来更好地为您提供各项服务,点击此处了解我们的隐私策略。 如您需继续使用本网站,请您授权我们使用本地 cookie 来保存部分信息。
全站搜索
您最值得信赖的光电行业旗舰网络服务平台!