强激光与粒子束, 2015, 27 (5): 051002, 网络出版: 2015-05-20
用于光阴极的光纤激光研制实验
Development of fiber laser system for a photocathode gun
光阴极 光阴极驱动激光 光纤激光 光子晶体光纤 光纤放大器 photocathode photocathode driven laser fiber laser photonic crystal fiber fiber amplifier
摘要
为获得高亮度低发射度的电子束, 研制高重复频率高平均功率的光阴极驱动激光系统非常关键。利用光纤激光技术, 设计了100 MHz和1.3 GHz的激光系统。激光系统为全光纤结构, 采用了掺镱光子晶体光纤作为放大器增益介质。在初步验证实验中, 红外激光输出27 W, 倍频后绿光达到6 W。
Abstract
It is difficult to find commercial laser products meeting the requirements of ERL photocathode gun. Therefore, a drive laser system is being developed at Institute of High Energy Physics(IHEP), which comprises two kinds of laser seeds, 1.3 GHz and 100 MHz at repetition rate. Fiber amplifiers were being constructed and a test system was set up. The output power of the main amplifier can reach up to 27 W. With a 5-mm-long LBO crystal, the green second harmonic laser of 6 W was achieved in the preliminary validation experiment.
徐金强, 孙大睿. 用于光阴极的光纤激光研制实验[J]. 强激光与粒子束, 2015, 27(5): 051002. Xu Jinqiang, Sun Darui. Development of fiber laser system for a photocathode gun[J]. High Power Laser and Particle Beams, 2015, 27(5): 051002.
PDF全文
