中国激光, 2015, 42 (6): 0602003, 网络出版: 2022-09-23   

准分子激光微透镜整形均束装置 下载: 551次

Microlens Beam Shaping and Homogenizing Optical System for Excimer Laser
作者单位
北京工业大学激光工程研究院, 北京 100124
摘要
报道了248 nm 准分子激光微透镜整形均束装置的研制结果。实际采集并拍摄了248 nm 准分子激光光能量分布的彩色图像,使用Matlab分析处理该图像并提取了相关信息进行计算,通过光学软件ZEMAX 模拟出符合实际准分子激光光能量分布的光源。通过分析空间光能量分布特征,设计并加工出一套适用于248 nm 准分子激光的微透镜整形均束装置,且理论模拟和实际测试结果相吻合。248 nm 准分子激光通过该光学系统整形均束后,可以在工作平面上得到一个约18 mm×18 mm 的正方形光斑,光斑的能量均匀度误差(加工窗)在±2% 以内,平顶因子为0.90,光能量通过率为85%左右,解决了248 nm 准分子激光光斑形状不规则,且光斑能量分布不均匀的问题。该装置的研制成功,对于优质、高效地开展准分子激光微加工提供了具有自主知识产权的技术支撑。
Abstract
Research results of microlens beam shaping and homogenizing optical system for the 248 nm excimer laser are reported. Through the actual filming, an excimer laser light energy distribution color image is obtained. Matlab is used to analyze the image and extract relevant information to calculate. Then an actual energy distribution of excimer laser light source is simulated by the optical software ZEMAX. According to the characteristics of the light energy spatial distribution, a microlens beam shaping and homogenizing optical system for the 248 nm excimer laser is designed and fabricated. The experimental results are in good agreement with the theoretical simulations. After the shaping and homogenizing, a high uniform beam spot is obtained finally. The profile of this spot is a standard square with a size of 18 mm × 18 mm. The energy uniformity error (process window) of the beam spot is less than ± 2% , and the top- hat factor of energy distribution is about 0.90. This optical system can transform 85% of the total input beam power into the work plane of output beam. The spot shape of original excimer laser is irregular, and the energy distribution is nonuniform. This technical scheme can be a good solution to these problems. The successful development of this optical system has independent intellectual property rights, and also provides a technical support for the excimer laser micromachining with high quality and efficiency.

靳羽华, 赵艳, 蒋毅坚. 准分子激光微透镜整形均束装置[J]. 中国激光, 2015, 42(6): 0602003. Jin Yuhua, Zhao Yan, Jiang Yijian. Microlens Beam Shaping and Homogenizing Optical System for Excimer Laser[J]. Chinese Journal of Lasers, 2015, 42(6): 0602003.

本文已被 5 篇论文引用
被引统计数据来源于中国光学期刊网
引用该论文: TXT   |   EndNote

相关论文

加载中...

关于本站 Cookie 的使用提示

中国光学期刊网使用基于 cookie 的技术来更好地为您提供各项服务,点击此处了解我们的隐私策略。 如您需继续使用本网站,请您授权我们使用本地 cookie 来保存部分信息。
全站搜索
您最值得信赖的光电行业旗舰网络服务平台!