光学 精密工程, 2015, 23 (5): 1416, 网络出版: 2015-06-11   

谐振充电技术在火花开关触发系统中的应用

Application of series resonant charging technology to trigger system for rotated spark switch
作者单位
1 中国科学院 长春光学精密机械与物理研究所, 吉林 长春 130033
2 中国科学院大学, 北京 100039
摘要
为提高触发高功率横向激励大气压(TEA) CO2激光器中旋转火花开关的稳定性和可靠性, 减小火花开关触发系统的体积和重量, 提出了将高频谐振充电技术应用于触发系统的方法。研发了采用全桥逆变结构和串联谐振软开关电路、输出电压大于38 kV、输出功率为2 kW的高频高压充电电源并将其作为旋转火花开关触发系统。该系统的全桥逆变电路由智能功率模块(IPM)构成, 采用MSP430单片机控制IPM驱动信号的频率、脉宽以及个数, 直流电压经全桥逆变电路及串联谐振电路在高压脉冲变压器原边获得脉冲信号。此脉冲信号经高压脉冲变压器的升压和变压器次级整流给高压电容充电, 当电容电压达到火花开关间隙的自击穿电压时, 电容放电。实验结果表明, 该系统在500 Hz的重复频率下能连续稳定触发旋转火花开关, 提高了触发系统的可靠性和稳定性, 其体积及重量为脉冲式触发系统的1/2。
Abstract
To improve the stability and reliability of the rotated spark switch system in a high power Transversely Excited Atmospheric(TEA) CO2 laser and to reduce the volume and weight of a trigger system for the rotated spark switch, this paper induces the series resonant charging technology into the trigger system. A high-frequency high-voltage charging power supply consisting of a full bridge inverter circuit and a series resonant soft switch circuit is developed. The charging power supply is taken as a trigger system for the rotated spark switch and offers a output voltage greater than 38 kV and a output power of 2 kV. In this system, the full bridge inverter circuits consist of Intelligent Power Models(IPMs), and the MSP430 is used to control the frequency, pulse width and the number of pulses for IPM driving signals. After full-bridge inverter circuit and series-resonant circuit get the pulse signals, it will charge for a high voltage capacitor by increasing the voltage and rectifying for a high-voltage pulse transformer. When the voltage reaches the hold-voltage of spark switching, the capatior discharges. The results suggest that the system can continuously and stably trigger the rotated spark switch when the Pulse Repetition Frequency(PRF) is 500 Hz. As a result, the system enhances the stability and reliability of triggering rotated spark switch and reduces the volume and weight of the system by 1/2 that of a pulse trigger system.

张兴亮, 郭立红, 孟范江, 方艳超, 张振东, 毛书勤. 谐振充电技术在火花开关触发系统中的应用[J]. 光学 精密工程, 2015, 23(5): 1416. Zhang Xing-liang, Guo Li-hong, Meng Fan-jiang, Fang Yan-chao, Zhang Zhen-dong, MAO Shu-qin. Application of series resonant charging technology to trigger system for rotated spark switch[J]. Optics and Precision Engineering, 2015, 23(5): 1416.

本文已被 2 篇论文引用
被引统计数据来源于中国光学期刊网
引用该论文: TXT   |   EndNote

相关论文

加载中...

关于本站 Cookie 的使用提示

中国光学期刊网使用基于 cookie 的技术来更好地为您提供各项服务,点击此处了解我们的隐私策略。 如您需继续使用本网站,请您授权我们使用本地 cookie 来保存部分信息。
全站搜索
您最值得信赖的光电行业旗舰网络服务平台!