强激光与粒子束, 2015, 27 (6): 061002, 网络出版: 2015-06-17   

用于共孔径相干合成的衍射光学元件设计

Design of diffractive optical elements for filled-aperture coherent beam combining
颜宏 1,2,3,*张卫 1叶一东 1,2陈黎 1田飞 1
作者单位
1 中国工程物理研究院 应用电子学研究所, 四川 绵阳 621900
2 中国工程物理研究院 高能激光科学与技术重点实验室, 四川 绵阳 621900
3 中国工程物理研究院 研究生部, 北京 100088
摘要
分析了衍射光学元件实现共孔径相干合成的物理过程,建立了基于衍射光学元件的共孔径相干合成数学模型,推导了合成光束复振幅与入射光束和衍射光学元件相位分布之间的关系.提出用合成光束强度分布的均匀性作为评价函数的优化方法,获得了一维衍射合束器的相位分布.与文献报道的衍射光学元件分束器相比,可获得更高的合成效率.采用模拟退火算法结合随机并行梯度下降算法优化合束器设计,提高了计算效率,获得了多束衍射合束器的相位分布和合成效率.分析了单子束失效及合束器像差对合成效率的影响,结果表明:随着合束数量的增加,单子束失效对合成效率的影响逐渐减小;若使合成效率退化小于5%,衍射光学元件的波像差均方根值应控制在λ/28以内.
Abstract
The physical process of filled-aperture coherent beam combining (CBC) using diffractive optical elements (DOEs) is analyzed.The mathematical model of CBC based on DOEs is build up,and the relationship between the complex amplitude of the combined beam and the phase distribution of the DOEs is deduced.The uniformity of the intensity of combined beam is used as the evaluation function of the iteration,and the phase distributions of the one-dimensional diffractive beam combiners are calculated.Compared with the reported DOEs beam splitters,these beam combiners can achieve higher combining efficiency.The phase distributions of the beam combiners are optimized using both simulated annealing algorithm and stochastic parallel gradient descent algorithm,and the computational efficiency is significantly improved.The phase distribution and combining efficiency of multi-beam diffractive beam combiners are presented.The impacts of single disabled beam and surface error of the DOEs on the combining efficiency are analyzed.The simulation results expose that with the increasing number of component beams the impact of single disabled beam on combining efficiency decreases,and the RMS wavefront error of the DOEs should be less than 1/28 of the wavelength in order to make combining efficiency degradation less than 5%.

颜宏, 张卫, 叶一东, 陈黎, 田飞. 用于共孔径相干合成的衍射光学元件设计[J]. 强激光与粒子束, 2015, 27(6): 061002. Yan Hong, Zhang Wei, Ye Yidong, Chen Li, Tian Fei. Design of diffractive optical elements for filled-aperture coherent beam combining[J]. High Power Laser and Particle Beams, 2015, 27(6): 061002.

本文已被 1 篇论文引用
被引统计数据来源于中国光学期刊网
引用该论文: TXT   |   EndNote

相关论文

加载中...

关于本站 Cookie 的使用提示

中国光学期刊网使用基于 cookie 的技术来更好地为您提供各项服务,点击此处了解我们的隐私策略。 如您需继续使用本网站,请您授权我们使用本地 cookie 来保存部分信息。
全站搜索
您最值得信赖的光电行业旗舰网络服务平台!