发光学报, 2015, 36 (6): 657, 网络出版: 2015-06-25  

立体发光LED灯片的光学性能研究

Optical Characterization of Three-dimensional Light-emitting LED
作者单位
1 上海应用技术学院 理学院, 上海 201418
2 上海应用技术学院 材料与工程学院, 上海 201418
3 浙江亿米光电科技有限公司, 浙江 嘉兴 314100
4 上海博恩世通光电股份有限公司, 上海 201108
摘要
立体发光灯片的关键是在保证光通量的前提下,如何获得均匀的正反面发光.本文对3种荧光粉平面涂覆立体灯片的正面和反面的瞬态和稳态光通量、色温、色品坐标进行了研究,发现直接涂覆荧光粉胶的灯片总的光通量最大,但正反面的发光性能相差很大;在涂覆荧光粉之前先平面涂覆一层硅胶,可获得正反面发光较均匀的灯片;而在该硅胶层内掺杂扩散粉的灯片,不但没有提高灯片的正反面发光均匀度,反而大幅度降低了光通量值.此外,测试3种样品的发光角度,发现其发光角度分布相似,而发光强度与积分球测试的光通量比值相近.结果表明,涂覆荧光粉之前先平面涂覆一层硅胶工艺,既可以保证立体发光灯片具有较大的光通量又可以获得均匀的正反面发光.
Abstract
The luminescence performance characterized by luminous flux,color temperature,chromaticity coordinate of three-dimensional light emitting diodes (LEDs) has been investigated by using different phosphor coating methods.The LED die was directly coating with mixed phosphors and silicone which have the maximum total luminous flux.However,this encapsulation incurs luminous uneven problem of front and back which limit three-dimensional luminescence application.Therefore,this work attempts to use the silicon and spreading powder to change the light path on the basis of less loss of luminous flux.Experimental results indicate that the brightness uniformity can be improved when increasing silicon layer between LED die and phosphor,while spreading powder layer would induce significant light attenuation.Moreover,the three packing have similar light angle.Therefore,silicon layer provides an alternative packing solution for three-dimensional LED light application.

邹军, 李杨, 朱伟, 陈浩, 曲士巍, 王艺燃, 吴晓枫, 林宇杰. 立体发光LED灯片的光学性能研究[J]. 发光学报, 2015, 36(6): 657. ZOU Jun, LI Yang, ZHU Wei, CHEN Hao, QU Shi-wei, WANG Yi-ran, WU Xiao-feng, LIN Yu-jie. Optical Characterization of Three-dimensional Light-emitting LED[J]. Chinese Journal of Luminescence, 2015, 36(6): 657.

关于本站 Cookie 的使用提示

中国光学期刊网使用基于 cookie 的技术来更好地为您提供各项服务,点击此处了解我们的隐私策略。 如您需继续使用本网站,请您授权我们使用本地 cookie 来保存部分信息。
全站搜索
您最值得信赖的光电行业旗舰网络服务平台!