红外, 2015, 36 (6): 21, 网络出版: 2015-08-25  

基于TVP5147芯片的多路红外视频切换解码问题研究

Study of Switching and Decoding for Multi-channel Infrared Video Based on TVP5147 Chip
作者单位
1 防空兵学院, 河南 郑州 450052
2 71426部队,河南 焦作 454000
摘要
在基于TVP5147和FPGA的高精度红外视频数据采集系统中, 利用行同步信号HS、列同步信号VS、奇偶场信号FID和有效视频信号AVID进行视频 采集,一般会造成采集与显示部分不能使用同一个时钟脉冲信号,以至于在不掉电进行视频 切换时就会出现视频采集与显示无法同步的现象。介绍了一种基于VPO视频数据流 解码来提取视频信号和时钟信号的视频采集方法。由于可使采集和显示部分使用同一个基准信 号,该方法有效解决了视频切换时采集与显示不同步的问题,而且在自主研发的采集系统中取得了良好的使用效果。
Abstract
In the precision infrared video data acquisition systems based on TVP5147 and FPGA chips, the video signals are captured by using the Horizontal sync signal (HS), Vertical sync signal (VS), Odd/even field indicator signal (FID) and Active video indicator signal (AVID). This may generally cause the video capture part and video display part to be unable to use the same clock pulse signal, so that video capturing and video displaying can not be synchronized when the video is switched. A method for extracting video signals and clock signals by decoding VPO video data stream is presented. Since the video capture part and video display part can use the same reference clock signal, the problem that capturing and displaying are not synchronized when the video is switched is solved. The method is verified in our self-developed video capture system and good effectiveness is exhibited.

李明明, 王新赛, 郑献民, 谢志伟. 基于TVP5147芯片的多路红外视频切换解码问题研究[J]. 红外, 2015, 36(6): 21. LI Ming-ming, WANG Xin-sai, ZHENG Xian-min, XIE Zhi-wei. Study of Switching and Decoding for Multi-channel Infrared Video Based on TVP5147 Chip[J]. INFRARED, 2015, 36(6): 21.

关于本站 Cookie 的使用提示

中国光学期刊网使用基于 cookie 的技术来更好地为您提供各项服务,点击此处了解我们的隐私策略。 如您需继续使用本网站,请您授权我们使用本地 cookie 来保存部分信息。
全站搜索
您最值得信赖的光电行业旗舰网络服务平台!