光通信研究, 2015 (5): 51, 网络出版: 2015-12-18  

一种基于FPF的高速可调谐激光器

An FPF-based high-speed tunable laser
作者单位
温州市铁路与轨道交通投资集团有限公司, 浙江 温州 325000
摘要
为了克服FPF(法布里-珀罗滤波器)在高频扫描时驱动能力不足易产生失真的问题, 设计了一种推挽式的FPF驱动电路, 扫描频率可达1 kHz。利用TINA软件对该驱动电路建模, 仿真研究了PZT (压电陶瓷)容性负载对驱动电路的影响, 找出了对其进行容性补偿的方法。使用该方法消除了驱动电路自激振荡的隐患, 解决了高频信号驱动大容抗负载时易产生失真的问题。通过测试可知, 基于所设计的驱动电路的FPF高速可调谐激光器性能优良, 在1 kHz高频工作条件下, 其波长解调误差小于±10 pm。
Abstract
In order to solve the problem of Fabry-Perot Filter (FPF) distortion resulted from the insufficient driving capability in high-frequency scanning, this paper designs a push-pull driving circuit with a scanning frequency of 1 kHz for a FPF-based tunable laser. It performs the modeling of the driving circuit by the TINA software, analyzes by simulation the impacts of the capacitive load of piezoelectric ceramics on this circuit and finds the method for its capacitive compensation. By using this method, it removes the hidden trouble of its self-excited oscillation, thus solving the problem of distortion generated when high-frequency signals drive a large capacitive reactance load. The test results show that with this driving circuit-based FPF, the high-speed tunable laser has good performance and its wavelength demodulation error is less than ±10 pm in high frequency of 1 kHz.

杨迎卯. 一种基于FPF的高速可调谐激光器[J]. 光通信研究, 2015, 41(5): 51. Yang Yingmao. An FPF-based high-speed tunable laser[J]. Study On Optical Communications, 2015, 41(5): 51.

关于本站 Cookie 的使用提示

中国光学期刊网使用基于 cookie 的技术来更好地为您提供各项服务,点击此处了解我们的隐私策略。 如您需继续使用本网站,请您授权我们使用本地 cookie 来保存部分信息。
全站搜索
您最值得信赖的光电行业旗舰网络服务平台!