应用光学, 2015, 36 (5): 723, 网络出版: 2015-12-18   

紫外像增强器辐射增益测试系统设计

Testing system of radiation gain in UV image intensifiers
作者单位
南京理工大学 机械工程学院, 江苏 南京 210094
摘要
针对辐射增益是紫外像增强器的主要性能参数, 决定着紫外像增强器的综合性能, 提出一种用于测试紫外像增强器辐射增益的测试仪, 测试波长范围为200 nm~400 nm, 亮度测量视场角可选(1/8)°、(1/4)°、(1/2)°、1°、2°、3°。通过改变微通道板电压、阴极电压和荧光屏电压等参数, 完成对紫外像增强器的辐射增益测试,测试结果表明: 测试曲线变化趋势和紫外像增强器的工作特性相吻合, 入射紫外辐射强度调节范围为10-11W/cm2~10-7W/cm2, 辐射计最低探测强度可达10-11W/cm2, 最低亮度探测阈值可达3×10-4cd/m2, 辐射增益测试重复性优于±8%。
Abstract
Radiation gain acting as the main performance parameter of the ultraviolet(UV) image intensifier determines the comprehensive performance of it, so a test intensifier was designed to measure the radiation gain in UV image intensifier,whose test range was 200 nm~400 nm, and there were 6 (1/8°,1/4°,1/2°,1°,2°and 3°) fields of view (FOVs) for choice .Referring to the image intensifier brightness gain measurement device, the testing system of radiation gain in UV image intensifier was designed. Based on the testing principle and method, the test software was designed. By changing the voltage of micro channel plate,the cathode voltage and screen voltage, the UV image intensifier was measured. The test results indicate that the test curve changing trend coincides with the operation characteristics of the UV intensifier, the incident UV radiation intensity is 10-7W/cm2~10-11W/cm2,the minimum detecting intensity of radiometer was 10-11W/cm2,the minimum brightness detection threshold is 3×10-4cd/m2 and the test repeatability of radiation gain is better than ±8%.

刘涛, 邱亚峰. 紫外像增强器辐射增益测试系统设计[J]. 应用光学, 2015, 36(5): 723. Liu Tao, Qiu Yafeng. Testing system of radiation gain in UV image intensifiers[J]. Journal of Applied Optics, 2015, 36(5): 723.

本文已被 2 篇论文引用
被引统计数据来源于中国光学期刊网
引用该论文: TXT   |   EndNote

相关论文

加载中...

关于本站 Cookie 的使用提示

中国光学期刊网使用基于 cookie 的技术来更好地为您提供各项服务,点击此处了解我们的隐私策略。 如您需继续使用本网站,请您授权我们使用本地 cookie 来保存部分信息。
全站搜索
您最值得信赖的光电行业旗舰网络服务平台!