应用激光, 2015, 35 (5): 578, 网络出版: 2015-12-18   

单激光器剥线平台设计和工艺参数研究

Design and Process Parameters Research of Single-laser Stripping Platform
作者单位
苏州大学机电工程学院,江苏 苏州 215021
摘要
对于极细线,机械式剥线方式已无法满足要求,而激光剥线易于与电子设备集成及可控性高,已经得到广泛应用,目前主要采用两个激光器进行导线剥离,该方法成本较高。研究设计了一种基于自动双工位翻转机构的单激光器剥线平台,通过双工位翻转即可实现导线的双向剥离。和现有的双头激光器的导线剥离相比,虽然完成一排导线的剥离时间略长,但仍然能满足剥线产量要求,且剥离质量与双头激光器相当。与双头激光器相比,剥线成本缩小了一半,对于中小型企业是较理想的选择,并在此设备上对手机天线进行了剥线研究,得出不同工艺参数对剥线质量的影响规律,获得剥离手机天线的最佳工艺参数。
Abstract
It is obvious that mechanical stripping is unable to meet the requirements for the stripping of extremely thin wires. Laser stripping has been widely used for its easy integration with electromechanical equipment and high controllability. Currently most laser stripping devices have to utilize double lasers, resulting in high-cost. To solve this problem, a single-laser stripping platform based on automatic double-position flipping is designed. This platform can realize bi-directional stripping with only one laser through automatic double-position flipping. Compared with double-laser stripping platform, the single-laser one can meet the requirements of stripping production with slightly longer stripping time per row of wires but is only half the cost and of the same stripping quality, making it ideal for most medium and small companies. Research has been done on this device of mobile phone antenna stripping. The influence of different process parameters on the stripping quality and the optimal process parameter has been obtained.

杜秋, 杨桂林, 王明娣, 石世宏, 孙立宁, 杭小林, 汤攀飞. 单激光器剥线平台设计和工艺参数研究[J]. 应用激光, 2015, 35(5): 578. Du Qiu, Yang Guilin, Wang Mingdi, Sun lining, Shi Shihong, Hang Xiaolin, Tang Panfei. Design and Process Parameters Research of Single-laser Stripping Platform[J]. APPLIED LASER, 2015, 35(5): 578.

本文已被 1 篇论文引用
被引统计数据来源于中国光学期刊网
引用该论文: TXT   |   EndNote

相关论文

加载中...

关于本站 Cookie 的使用提示

中国光学期刊网使用基于 cookie 的技术来更好地为您提供各项服务,点击此处了解我们的隐私策略。 如您需继续使用本网站,请您授权我们使用本地 cookie 来保存部分信息。
全站搜索
您最值得信赖的光电行业旗舰网络服务平台!