应用激光, 2015, 35 (6): 724, 网络出版: 2016-01-19  

航空电子系统中串型光纤通道网络建模与仿真

Modeling and Simulation of Serial Fibre Channel Network in Avionic System
作者单位
空军工程大学航空航天工程学院,陕西 西安 710038
摘要
光纤通道协议只定义了三种基本拓扑结构,并未对具体网络拓扑应用做详细说明。为解决光纤通道网络的实际应用问题,在对现有基本拓扑结构进行研究的基础上,提出一种新型交换机串型光纤通道网络结构。对该结构进行深入分析,将排队论引入建模过程,结合网络通信过程,通过建立串型服务台排队网络模型对其端到端延迟进行了研究。在OPNET平台下对规模不同的串型光纤通道网络进行了建模与仿真,通过对仿真结果的分析以及与理论值对比表明,在一定规模下该串型结构能够有效保证数据传输过程中的端到端延迟,很好满足了航空电子系统的实时性要求。
Abstract
In Fibre Channel protocol, only three kinds of basic topology structure are defined and the specific application is not introduced in detail .In order to solve the actual application problem, a kind of new switches-serial Fibre channel network was put forward. The structure was deeply analyzed and the queuing theory was introduced into the modeling process. Combined with the network communication process and the establishment of the severs-serial queuing networks model, the end-to-end delay was studied. The different scales of serial Fibre channel networks were modeled and simulated based on OPNET. The simulation results and theoretical values show that the structure can effectively guarantee the end-to-end delay in the process of data transmission and satisfy the real-time requirement of avionics system.

刘达, 王勇, 褚文奎, 李炳乾. 航空电子系统中串型光纤通道网络建模与仿真[J]. 应用激光, 2015, 35(6): 724. Liu Da, Wang Yong, Chu Wenkui, Li Bingqian. Modeling and Simulation of Serial Fibre Channel Network in Avionic System[J]. APPLIED LASER, 2015, 35(6): 724.

关于本站 Cookie 的使用提示

中国光学期刊网使用基于 cookie 的技术来更好地为您提供各项服务,点击此处了解我们的隐私策略。 如您需继续使用本网站,请您授权我们使用本地 cookie 来保存部分信息。
全站搜索
您最值得信赖的光电行业旗舰网络服务平台!