激光与光电子学进展, 2016, 53 (3): 031403, 网络出版: 2016-01-22   

激光切割木材试验及其加工质量的影响因素分析 下载: 611次

Laser Cutting Wood Test and Influencing Factors of Processing Quality
作者单位
东北林业大学林业与木工机械工程技术中心, 黑龙江 哈尔滨 150040
摘要
采用固体脉冲激光器,研究了激光能量、进给速度及切缝深度对厚度为2 mm 的核桃楸、柞木、水曲柳及黄波罗板材的切缝加工质量的影响。试验结果表明,当脉冲激光频率为20 Hz,激光能量为300 mJ,切缝长度为12 mm 时,核桃楸切缝表面加工质量最好。在激光能量为116 mJ 时,柞木的切缝表面加工质量最好。试验证明,对于同种木材,在激光能量增大时切缝表面熔渣减少,光滑程度提高,加工质量相应提高。激光能量和切割深度不变时,木材气干密度增大,切割的进给速度随之减小,切缝表面加工质量提高。
Abstract
A solid pulse laser laboratory bench is used to study the impact of laser energy, feed rate and kerf depth on slit surface processing quality of Juglans malldshurica, Quercus mongolica, Fraxinus mandshurica and Phellodendron amurense with thickness of 2 mm. The results show that with pulsed laser frequency of 20 Hz, laser energy of 300 mJ and kerf length of 12 mm, the kerf surface quality of Juglans malldshurica is the best. When the laser energy is 116 mJ, the kerf surface quality of Quercus mongolica is the best. The tests prove that for the same kind of wood, the increase of laser energy can reduce the molten slag on the kerf surface and improve both of the smoothness and the kerf surface quality. When the laser energy and the depth of kerf are constant, the feed rate is reduced and the processing quality of kerf surface is improved as the air-dry density increases.

姜新波, 李晋哲, 白岩, 吴哲, 杨春梅, 马岩. 激光切割木材试验及其加工质量的影响因素分析[J]. 激光与光电子学进展, 2016, 53(3): 031403. Jiang Xinbo, Li Jinzhe, Bai Yan, Wu Zhe, Yang Chunmei, Ma Yan. Laser Cutting Wood Test and Influencing Factors of Processing Quality[J]. Laser & Optoelectronics Progress, 2016, 53(3): 031403.

本文已被 1 篇论文引用
被引统计数据来源于中国光学期刊网
引用该论文: TXT   |   EndNote

相关论文

加载中...

关于本站 Cookie 的使用提示

中国光学期刊网使用基于 cookie 的技术来更好地为您提供各项服务,点击此处了解我们的隐私策略。 如您需继续使用本网站,请您授权我们使用本地 cookie 来保存部分信息。
全站搜索
您最值得信赖的光电行业旗舰网络服务平台!