红外与激光工程, 2015, 44 (2): 0556, 网络出版: 2016-01-26   

用于线性菲涅尔式聚光系统的CPC仿真研究

Simulation study of a CPC for linear Fresnel reflector system
作者单位
1 兰州交通大学国家绿色镀膜技术与装备工程技术研究中心,甘肃 兰州 730070
2 兰州交通大学光电技术与智能控制教育部重点实验室,甘肃 兰州 730070
3 西南交通大学电气工程学院,四川 成都 610031
摘要
:以用于线性菲涅尔式聚光系统的CPC为研究对象,在Matlab环境下建立了数学模型。利用光线跟踪法对不同间隙、不同最大接受半角和不同截取比的CPC汇聚率进行仿真研究,结果表明用于线性菲涅尔式聚光系统的CPC对不同入射角光线具有特定的汇聚率,随着入射角的变化会出现极小值,极小值所对应的入射角仅与CPC最大接收半角相关,与截取比和间隙无关。仿真计算了间隙为50 mm、最大接受半角为45°、截取比为0.75的CPC汇聚率为80.15%。最后通过实验验证了仿真方法的有效性。
Abstract
Compound parabolic collector(CPC) plays an important role in optical efficiency of linear Fresnel reflector(LFR) system. The CPC for LFR was studied, and its mathematical model was established by using Matlab. The method of ray tracking was used to calculate the convergence ratios of CPC with different gap, different maximum acceptance angle, and different truncation ratio. The simulation study illustrates that the CPC for LFR has the specific convergence ratio for the ray with different incident angle. There are two minimum points in the convergence ratio with the change of incident angle. And their positions only depend on maximum acceptance angle, not including truncation ratio and gap. The CPC with gap 50 mm, maximum acceptance angle 45°, and truncation ration 0.75, could achieve a high concentrate ration about 80.15%. The simulation method was further verified by the experimental measurement results, and it has guiding significance for design of CPC.

王成龙, 马军, 范多旺, 鲁小兵. 用于线性菲涅尔式聚光系统的CPC仿真研究[J]. 红外与激光工程, 2015, 44(2): 0556. Wang Chenglong, Ma Jun, Fan Duowang, Lu Xiaobing. Simulation study of a CPC for linear Fresnel reflector system[J]. Infrared and Laser Engineering, 2015, 44(2): 0556.

本文已被 5 篇论文引用
被引统计数据来源于中国光学期刊网
引用该论文: TXT   |   EndNote

相关论文

加载中...

关于本站 Cookie 的使用提示

中国光学期刊网使用基于 cookie 的技术来更好地为您提供各项服务,点击此处了解我们的隐私策略。 如您需继续使用本网站,请您授权我们使用本地 cookie 来保存部分信息。
全站搜索
您最值得信赖的光电行业旗舰网络服务平台!