激光与光电子学进展, 2016, 53 (3): 031404, 网络出版: 2016-03-04  

基于SolidWorks 的四镜环形腔容差简易分析方法 下载: 507次

Simple Method to Analyze Tolerance of 4-Mirror Ring Resonator Depending on Solidworks
作者单位
1 北京理工大学光电学院, 北京 100081
2 北京理工大学珠海学院信息学院, 广东 珠海 519088
摘要
针对环形激光谐振腔的光路变动的问题,基于SolidWorks 建立了一个两平面镜和两凹面镜构成的四镜8 字形稳定环形激光谐振腔模型。使用该方法分析了腔镜水平移动、垂直移动和绕光轴旋转对光路的影响,可以简单直观地观察到腔内光路的变化,并获得调节容差,模拟过程更加接近环形腔实际调节过程。当增大晶体和腔镜M1 之间的距离L 时,可以提高腔镜M2 的水平位移容差,但角度容差有所降低,垂直容差变化不大。水平位移容差和角度容差有较强的耦合关系,腔镜水平方向的微动往往可以通过改变角度来补偿。所得到的结果对于腔设计、腔调节以及提高腔的精度具有重要的指导作用,同时可以推广到对三角形腔、正方形腔以及非平面环形腔等谐振腔的容差分析当中。
Abstract
In order to analyze the change of optical axis in the ring laser resonator, the model of an 8-shaped 4-mirror ring resonator containing two flat mirrors and two concave mirrors has been established depending on SolidWorks software. It is simple and intuitive to observe the change of optical axis in the ring laser resonator with the horizontal shift, vertical shift and the rotation around the optical axis of M2, and it is more close to the actual process of the adjustment of ring resonator. When increasing the distance between M1 and the crystal, the horizontal and angular tolerances of M2 are alterred significantly, and the vertical tolerance varys thinly. These results are important for cavity design, cavity improvement and alignment of high accuracy ring laser resonator, and it can be applied to the tolerance analysis about other resonators such as triangle ring resonator, square ring resonator and non-planar ring resonator.

李坤, 薛竣文, 苏秉华, 东苗, 张韦, 吕海娟. 基于SolidWorks 的四镜环形腔容差简易分析方法[J]. 激光与光电子学进展, 2016, 53(3): 031404. Li Kun, Xue Junwen, Su Binghua, Dong Miao, Zhang Wei, Lü Haijuan. Simple Method to Analyze Tolerance of 4-Mirror Ring Resonator Depending on Solidworks[J]. Laser & Optoelectronics Progress, 2016, 53(3): 031404.

关于本站 Cookie 的使用提示

中国光学期刊网使用基于 cookie 的技术来更好地为您提供各项服务,点击此处了解我们的隐私策略。 如您需继续使用本网站,请您授权我们使用本地 cookie 来保存部分信息。
全站搜索
您最值得信赖的光电行业旗舰网络服务平台!