光电工程, 2016, 43 (3): 41, 网络出版: 2016-09-12  

布里渊传感系统脉冲光源消光比自动控制方法

An Auto-control Method of Pulsed Light Extinction Ratio in the Brillouin Sensing System
作者单位
1 中国计量学院计量测试工程学院,杭州 310018
2 上海光学精密机械研究所,上海 201800
摘要
针对布里渊光时域反射型 (BOTDR)分布式光纤传感系统中脉冲光源消光比易受偏置电压漂移影响的问题,本文提出了一种结合双电极串联结构电光调制器(EOM)及“扫描.步进跟踪”算法的脉冲光源消光比自动控制方法。实验结果表明,该方法可将 EOM输出脉冲光的消光比稳定在 50 dB以上。在 150 min的测试时间里,输出脉冲光消光比的最大值为 52.4 dB,最小值为 51.1 dB,波动值仅为 1.3 dB。该方法对 BOTDR光纤传感系统及高功率激光驱动装置等设备中脉冲光源性能的提升具有重要意义。
Abstract
A novel method to control the pulsed light extinction ratio automatically, which combines a double electrode series structure EOM with “scanning & step-tracking” algorithm, is proposed. It aims to address the problem that extinction ratio of pulsed light is affected by bias voltage shifting in a Brillouin Optical-fiber Time-domain Reflectometry (BOTDR) based on distributed optical fiber sensing system. Based on the method, some experiments are conducted and important conclusions are deduced. The results show that it could keep the extinction ratio of pulsed light above 50 dB steadily. The fluctuation of extinction ratio is only 1.3 dB, maximum value of extinction ratio is 52.4 dB and the minimum value is 51.1 dB. It is indicated that the proposed method will have important significance for enhancing the performance of pulsed light source in BOTDR optical fiber sensing system and high power laser driving device.

胡佳成, 王婵媛, 李国扬, 沈小燕. 布里渊传感系统脉冲光源消光比自动控制方法[J]. 光电工程, 2016, 43(3): 41. HU Jiacheng, WANG Chanyuan, LI Guoyang, SHEN Xiaoyan. An Auto-control Method of Pulsed Light Extinction Ratio in the Brillouin Sensing System[J]. Opto-Electronic Engineering, 2016, 43(3): 41.

关于本站 Cookie 的使用提示

中国光学期刊网使用基于 cookie 的技术来更好地为您提供各项服务,点击此处了解我们的隐私策略。 如您需继续使用本网站,请您授权我们使用本地 cookie 来保存部分信息。
全站搜索
您最值得信赖的光电行业旗舰网络服务平台!