红外与激光工程, 2016, 45 (3): 0313002, 网络出版: 2016-04-05   

空间相机反射镜组件的胶结技术

Bonding technique of mirror components in space camera
作者单位
1 中国科学院长春光学精密机械与物理研究所,吉林 长春 130033
2 中国科学院大学,北京 100049
摘要
为了保证口径为Φ320 mm的反射镜粘胶前后面形精度变化较小,同时组件的动静态刚度满足使用要求,对空间相机反射镜的胶结技术进行了研究。首先,得出了六条均布粘胶和沿芯轴外环全粘胶两种粘胶方案的具体参数,并采用有限元的方法对两种方案进行了静刚度分析与光学性能分析;其次,在反射镜裸镜面形为0.030λ(λ=632.8)时,分别检测了采用这两种粘胶方案装配后反射镜的面形精度;最后,对反射镜组件进行了振动试验。分析与试验表明:采用六条均布粘胶方案装配后,进行振动试验组件完好无损,测得一阶频率为144.194 Hz,与有限元分析相对误差为1.23%,动静态刚度满足需求,同时对比外环全粘胶反射镜面形精度提高了13.5%。结果显示六条粘胶方案更适用于Φ320 mm反射镜组件的粘结。
Abstract
In order to ensure the surface form precision of a mirror whose caliber is Φ320 mm changes as small as possible before and after bonding, while static and dynamic stiffness of the mirror components meet the requirements, bonding technique of primary mirror in space camera was studied. Firstly, specific bonding parameters of six bonds and round bonds were achieved. Then, the finite element analysis for two bonding options was carried out to analyze static stiffness and optical properties. Finally, when the mirror′s surface form precision was 0.030λ(λ=632.8), the surface form precision of the mirror was tested. Besides, vibration test of mirror components was conducted. Analysis and experiment results indicate that after using six bonds option to assemble the mirror components, its first order frequency is 144.194 Hz and static and dynamic stiffness meet the requirements. Compared to round bonds option, the surface form precision of the mirror improves 13.5%. This results mean that the six bonds option is better for bonding the mirror whose caliber is near Φ320 mm.

郭骏立, 安源, 李宗轩, 李凯. 空间相机反射镜组件的胶结技术[J]. 红外与激光工程, 2016, 45(3): 0313002. Guo Junli, An Yuan, Li Zongxuan, Li Kai. Bonding technique of mirror components in space camera[J]. Infrared and Laser Engineering, 2016, 45(3): 0313002.

本文已被 3 篇论文引用
被引统计数据来源于中国光学期刊网
引用该论文: TXT   |   EndNote

相关论文

加载中...

关于本站 Cookie 的使用提示

中国光学期刊网使用基于 cookie 的技术来更好地为您提供各项服务,点击此处了解我们的隐私策略。 如您需继续使用本网站,请您授权我们使用本地 cookie 来保存部分信息。
全站搜索
您最值得信赖的光电行业旗舰网络服务平台!