红外与激光工程, 2016, 45 (3): 0318001, 网络出版: 2016-04-05   

R-C光学系统的计算机辅助装调

Computer aided alignment of R-C optical system
作者单位
中国科学院长春光学精密机械与物理研究所 航空光学成像与测量技术研究部,吉林 长春 130033
摘要
R-C光学系统是现代光学工程中常用的光学系统,以某一R-C光学系统为例,对其计算机辅助装调技术进行了研究。分析了R-C系统装调理论,确定以主镜为装调基准,调整次镜五个自由度的装调方法,建立起次镜失调量与系统Zernike系数的关系,以此指导装调工作,达到明确装调方向、缩短装调周期的目的。整机光学系统的波像差RMS值优于1/10波长,达到了成像质量的要求。对相机进行实验室和地面外场成像,获得的图像图像清晰,层次丰富,验证了装调工作的正确性。
Abstract
R-C optical system was a commonly used optical system in modern optical engineering, a case study of alignment technique of R-C optical system was stuided. The alignment theory of R-C optical system was analyzed. The main mirror was the adjustment datum, the five degree of freedom of secondary mirror was adjusted to improve the wavefront error of the whole optical system. The relationship between secondary mirror misalignment and Zernike coefficient of the whole system was obtained by computer-aided alignment and was used to guide alignment of secondary mirror. By use of this method, the alignment purpose was very clearly, that was adjusting the position of secondary mirror to reduce Zernike coefficient. The alignment period was then reduced. After alignment, wavefront error of the whole optical system was better than 1/10λ(RMS). It satisfies the design requirement. The images obtained from laboratory and outfield indicate the alignment is valid.

刘波, 丁亚林, 贾继强, 苏东风, 张雷. R-C光学系统的计算机辅助装调[J]. 红外与激光工程, 2016, 45(3): 0318001. Liu Bo, Ding Yalin, Jia Jiqiang, Su Dongfeng, Zhang Lei. Computer aided alignment of R-C optical system[J]. Infrared and Laser Engineering, 2016, 45(3): 0318001.

本文已被 2 篇论文引用
被引统计数据来源于中国光学期刊网
引用该论文: TXT   |   EndNote

相关论文

加载中...

关于本站 Cookie 的使用提示

中国光学期刊网使用基于 cookie 的技术来更好地为您提供各项服务,点击此处了解我们的隐私策略。 如您需继续使用本网站,请您授权我们使用本地 cookie 来保存部分信息。
全站搜索
您最值得信赖的光电行业旗舰网络服务平台!