电光与控制, 2016, 23 (3): 92, 网络出版: 2016-04-05   

液晶显示偏光片温度特性分析

Temperature Characteristics of Polarizer in LCDs
作者单位
1 合肥工业大学,特种显示技术教育部重点实验室
2 特种显示技术国家工程实验室
3 现代显示技术省部共建国家重点实验室
4 仪器科学与光电工程学院
5 合肥工业大学,光电技术研究院,合肥 230009
摘要
作为关键零部件,偏光片的性能直接影响液晶显示器的显示画面品质。对液晶显示用偏光片进行了全局加热试验和局部加热试验,全局加热时,偏光片不会出现局部漏光现象;而在局部加热时,当偏光片中心温度相同时,温度梯度较大的偏光片出现漏光。建立了偏光片的有限元热力学分析模型,仿真结果表明:全局加热时,偏光片不受面内剪切力的影响;局部加热温度梯度较小时,存在面内剪切力,但远远小于温度梯度较大时的剪切力。所以,面内剪切力是引起漏光的主要原因,应通过合理的散热设计和结构设计加以避免。
Abstract
As an important part of Liquid Crystal Display (LCD), polarizer has a direct effect on display quality.We made global heating and local heating experiments on polarizer used in LCDs.When the polarizer was globally heated, there was no light leakage.While in local heating, light leakage appeared on the polarizer with higher temperature gradients when center temperature is the same.The finite analysis model of the polarizer was established.The simulation results show that: 1) There is no shear stress on the polarizer when globally heated;and 2) The shear stress in the local heating test with small temperature gradient is far smaller than that in the test with large temperature gradient.Therefore, the shear stress is the main cause of light leakage.Reasonable design should be made on heat dissipation and structure on LCD to avoid shear stress.

陆吕晨, 冯奇斌, 弓欣, 吕国强. 液晶显示偏光片温度特性分析[J]. 电光与控制, 2016, 23(3): 92. LU Lyu-chen, FENG Qi-bin, GONG Xin, LYU Guo-qiang. Temperature Characteristics of Polarizer in LCDs[J]. Electronics Optics & Control, 2016, 23(3): 92.

本文已被 1 篇论文引用
被引统计数据来源于中国光学期刊网
引用该论文: TXT   |   EndNote

相关论文

加载中...

关于本站 Cookie 的使用提示

中国光学期刊网使用基于 cookie 的技术来更好地为您提供各项服务,点击此处了解我们的隐私策略。 如您需继续使用本网站,请您授权我们使用本地 cookie 来保存部分信息。
全站搜索
您最值得信赖的光电行业旗舰网络服务平台!