激光与光电子学进展, 2016, 53 (7): 070801, 网络出版: 2016-07-08   

机器视觉非球面双远心物镜的设计 下载: 1015次

Design of Aspherical Double Telecentric Lens for Machine Vision
作者单位
1 桂林电子科技大学机电工程学院光机电一体化研究所, 广西 桂林 541004
2 桂林电子科技大学电子与自动化工程学院, 广西 桂林 541004
摘要
为了用机器视觉检测技术精确检测微小零件的几何轮廓误差,设计了一套高分辨率非球面双远心物镜。根据检测要求确定系统的光学参数,运用架构分析法对系统进行整体光学初始结构设计。运用Zemax光学设计软件对初始结构进行优化,在物镜设计中引入非球面,使结构简化,并有效地平衡系统像差,提高像质。这个结构实现了低畸变(最大畸变小于一个像素)、高分辨率[在奈奎斯特频率90.91 lp/mm处调制传递函数(MTF)值优于0.7,全视场400 lp/mm处MTF值达到0.15]和双远心系统的设计要求。
Abstract
In order to detect the geometric contour errors of small parts using machine vision inspection technology, a high definition double telecentric optical lens is designed. The optical parameters are setup according to the requirements of detection. The structure analysis method for overall structural design is applied to construct the initial optical structure. The optical software Zemax is used to optimize the initial optical structure. The aspherical design is introduced to this lens, which can not only simplify the structure, but also effectively balance the system aberration and greatly improve the image quality. This structure realizes design requirements of low distortion (maximum distortion is less than one pixel), high resolution[modulation transfer function (MTF) at Nyquist frequency of 90.91 lp/mm is greater than 0.7, MTF at full field of 400 lp/mm reaches 0.15] and double telecentric system.

李明东, 高兴宇, 叶鹏, 陈朋波. 机器视觉非球面双远心物镜的设计[J]. 激光与光电子学进展, 2016, 53(7): 070801. Li Mingdong, Gao Xingyu, Ye Peng, Chen Pengbo. Design of Aspherical Double Telecentric Lens for Machine Vision[J]. Laser & Optoelectronics Progress, 2016, 53(7): 070801.

本文已被 7 篇论文引用
被引统计数据来源于中国光学期刊网
引用该论文: TXT   |   EndNote

相关论文

加载中...

关于本站 Cookie 的使用提示

中国光学期刊网使用基于 cookie 的技术来更好地为您提供各项服务,点击此处了解我们的隐私策略。 如您需继续使用本网站,请您授权我们使用本地 cookie 来保存部分信息。
全站搜索
您最值得信赖的光电行业旗舰网络服务平台!