红外与激光工程, 2016, 45 (8): 0819001, 网络出版: 2016-08-29   

三角机加工大口径离轴抛物面技术

Technology of large aperture off-axis parabolic mirror with tri-station processing center
张鑫 1,2罗霄 1,2闫力松 3张峰 1,2张学军 1,2
作者单位
1 中国科学院长春光学精密机械与物理研究所,吉林 长春 130033
2 中国科学院光学系统先进制造技术重点实验室,吉林 长春 130033
3 中国航天科工集团第九总体设计部,湖北 武汉 430000
摘要
为了实现大口径非球面镜的加工,设计制作了三角机加工中心,该加工中心具有三工位设计。基于该加工中心提出了一套非球面镜加工模型,每个工位只需利用两个转动轴即可实现大口径非球面镜的遍历加工,同时加工工位与检测工位可以互换,节约成本的同时提升加工效率。为了验证加工模型的可行性,结合工程实例,利用该加工中心对一口径为1 450 mm的离轴抛物面SiC反射镜进行了加工,实验结果表明,经过一轮迭代加工后,反射镜面形结果由PV 4.653 μm、RMS 0.409 7 μm收敛到PV 3.585 μm、RMS 0.258 1 μm, RMS收敛达37%。验证了模型的精度及可行性。
Abstract
To accomplish the processing to aspherical mirror with large aperture, the tri-station processing center was designed which has three work stations. Based on the processing center, an aspherical processing model was established. With two rotating axes, it could be used to accomplish the full aperture processing. To verify the practicability of the model, with actual project, the processing to a Ф1 450 mm off-axis parabolic mirror was finished. The result shows that after a cycle of processing, the map of the mirror restraint from PV 4.653 μm, RMS 0.409 7 μm to PV 3.585 μm, RMS 0.258 1 μm. The converging rate of RMS is 37%, which verifies the accuracy and practicability of the model.

张鑫, 罗霄, 闫力松, 张峰, 张学军. 三角机加工大口径离轴抛物面技术[J]. 红外与激光工程, 2016, 45(8): 0819001. Zhang Xin, Luo Xiao, Yan Lisong, Zhang Feng, Zhang Xuejun. Technology of large aperture off-axis parabolic mirror with tri-station processing center[J]. Infrared and Laser Engineering, 2016, 45(8): 0819001.

本文已被 1 篇论文引用
被引统计数据来源于中国光学期刊网
引用该论文: TXT   |   EndNote

相关论文

加载中...

关于本站 Cookie 的使用提示

中国光学期刊网使用基于 cookie 的技术来更好地为您提供各项服务,点击此处了解我们的隐私策略。 如您需继续使用本网站,请您授权我们使用本地 cookie 来保存部分信息。
全站搜索
您最值得信赖的光电行业旗舰网络服务平台!