激光技术, 2016, 40 (6): 806, 网络出版: 2016-11-23   

激光功率对镀Cu-Ni低碳钢/不锈钢焊点性能的影响

Effect of laser power on performance of dissimilar joints between Cu-Ni coated low carbon steel and stainless steel
作者单位
华中科技大学 材料成形与模具技术国家重点实验室, 武汉 430074
摘要
为了研究激光功率对不锈钢与铜-镍镀层低碳钢激光焊点性能的影响, 采用300W的Nd∶YAG激光器焊接不锈钢与铜-镍镀层低碳钢, 用光学显微镜观察焊点并测量尺寸, 用万能拉伸试验仪测试焊点结合强度。结果表明, 随着激光功率的增加, 低碳钢一侧焊点截面的尺寸增加。在焊点边缘原镀层区域附近富集的铜会导致裂纹的产生, 而激光功率的变化并不能消除焊点边缘铜的富集。激光功率的增加, 焊接模式由热导焊向深熔焊过渡, 导致焊点的尺寸显著增加, 焊点的结合强度提高。该结果对于研究激光功率对铜镍镀层低碳钢/不锈钢激光点焊是有帮助的。
Abstract
In order to study the effect of laser power on performance of dissimilar lap joints of austenite stainless steel and Cu-Ni coated low carbon steel, Nd∶YAG laser with 300W power was used to weld stainless steel and Cu-Ni coated low carbon steel. Optical microscope was adopted to observe the joint and measure the size of weld spot, and universal tensile machine was used to test the bond strength. The results indicate that the size of cross section of weld spot increases with the increase of laser power. The variation of laser power has no influence on the concentration of copper within weld joint which leads to the formation of weld crack. The increasing laser power leads to the transition of laser welding mode from conduction to keyhole. The transition causes the significant growth of weld size and the improvement of bond strength. The research is useful for studying the influence of laser power on laser welding between Cu-Ni coated low carbon steel and stainless steel.

王丹丹, 余圣甫, 刘毅. 激光功率对镀Cu-Ni低碳钢/不锈钢焊点性能的影响[J]. 激光技术, 2016, 40(6): 806. WANG Dandan, YU Shengfu, LIU Yi. Effect of laser power on performance of dissimilar joints between Cu-Ni coated low carbon steel and stainless steel[J]. Laser Technology, 2016, 40(6): 806.

本文已被 1 篇论文引用
被引统计数据来源于中国光学期刊网
引用该论文: TXT   |   EndNote

相关论文

加载中...

关于本站 Cookie 的使用提示

中国光学期刊网使用基于 cookie 的技术来更好地为您提供各项服务,点击此处了解我们的隐私策略。 如您需继续使用本网站,请您授权我们使用本地 cookie 来保存部分信息。
全站搜索
您最值得信赖的光电行业旗舰网络服务平台!