激光技术, 2016, 40 (6): 825, 网络出版: 2016-11-23   

汽车板激光扫描焊接工艺研究

Laser scanner welding processing of automobile panels
祁小勇 1,2,*李道金 1,2叶兵 1,2王爱华 1,2
作者单位
1 激光先进制造技术湖北省重点实验室, 武汉 430223
2 武汉华工激光工程有限责任公司, 武汉 430223
摘要
为了研究激光扫描焊接汽车板的工艺方法, 采用4kW光纤激光器对0.7mm镀锌板与0.8mm冷轧板SPCC两类汽车板的激光扫描焊接工艺进行了理论分析和实验验证, 得到了板间间隙、激光功率、扫描速率等对焊缝成形及强度的影响规律。结果表明, 当选取板间间隙0.1mm~0.2mm、激光功率3000W~3400W、焊接速率不小于3m/min等适当参量进行焊接时, 焊缝质量可满足电子束及激光焊接接头欠缺质量分级指南C级标准, 且强度高于母材。选取合适的工艺参量时, 激光扫描焊接在无保护气的作用下可得到高质量的焊缝。
Abstract
In order to research the process of laser scanner welding, the laser scanner welding process of 0.7mm galvanized sheet and 0.8mm cold-rolled sheet(SPCC)with a 4kW fiber laser was analyzed in theory and verified in experiments. The influence of the gap between the sheets, laser power and scanning speed on macro-morphology and strength were obtained. The results show that the welded seams achieved by laser parameters of plate gap 0.1mm~0.2mm, laser power 3kW~4kW and welding speed 3m/min have the strength higher than the base metal, and can satisfy the C-class of electron and laser beam welded joints (levels guidance for quality imperfaction). Laser scanner welding can get a high quality welding seam without shielding gas when selecting right parameters.

祁小勇, 李道金, 叶兵, 王爱华. 汽车板激光扫描焊接工艺研究[J]. 激光技术, 2016, 40(6): 825. QI Xiaoyong, LI Daojin, YE Bing, WANG Aihua. Laser scanner welding processing of automobile panels[J]. Laser Technology, 2016, 40(6): 825.

本文已被 1 篇论文引用
被引统计数据来源于中国光学期刊网
引用该论文: TXT   |   EndNote

相关论文

加载中...

关于本站 Cookie 的使用提示

中国光学期刊网使用基于 cookie 的技术来更好地为您提供各项服务,点击此处了解我们的隐私策略。 如您需继续使用本网站,请您授权我们使用本地 cookie 来保存部分信息。
全站搜索
您最值得信赖的光电行业旗舰网络服务平台!