太赫兹科学与电子信息学报, 2016, 14 (5): 820, 网络出版: 2016-11-30   

基于MEMS 方块谐振器的10 MHz振荡器

A 10 MHz oscillator using square MEMS resonator
作者单位
电子科技大学 电子工程学院,四川 成都 611731
摘要
方块谐振器的品质因数(Q)很高,但是插入损耗也很大。为了得到低相噪的微机电系统(MEMS)振荡器,需要进一步提高方块谐振器的Q 值,降低谐振器的插入损耗。通过支撑梁位置的合理设计可以达到极小的锚点损耗,从而实现非常高的品质因数。采用二阶面切变模态方块谐振器的设计方法,表现出了很多的优越性:Q 值更高,动态电阻更小(在间隙为0.25 μm 时达到82.1 Ω)。基于这种新型谐振器设计出的振荡器实现的相位噪声为:–156 dBc/Hz@1 kHz。
Abstract
The quality factor of square Micro Electromechanical System(MEMS) resonator is very high, whereas the insertion loss is very big. In order to obtain MEMS oscillator with low phase noise, the quality factor of square resonator is further improved, and the insertion loss is lowered. By reasonable designing, the exact support beam locations can minimize the anchor loss,and the proposed resonator achieves very high quality factor. The design method of Second-Mode Face Shear Square Micromechanical Resonator bears many advantages: higher quality factor and lower dynamic resistance(reaches 82.1 Ω at 0.25 μm gap). The oscillator based on this newly designed resonator achieves a lower phase noise: -156 dBc/Hz @1 kHz.

鲍飞鸿, NGUYEN Tan-loc, 李昕熠, 潘明争, 鲍景富. 基于MEMS 方块谐振器的10 MHz振荡器[J]. 太赫兹科学与电子信息学报, 2016, 14(5): 820. BAO Feihong, NGUYEN Tan-loc, LI Xinyi, PAN Mingzheng, BAO Jingfu. A 10 MHz oscillator using square MEMS resonator[J]. Journal of terahertz science and electronic information technology, 2016, 14(5): 820.

本文已被 1 篇论文引用
被引统计数据来源于中国光学期刊网
引用该论文: TXT   |   EndNote

相关论文

加载中...

关于本站 Cookie 的使用提示

中国光学期刊网使用基于 cookie 的技术来更好地为您提供各项服务,点击此处了解我们的隐私策略。 如您需继续使用本网站,请您授权我们使用本地 cookie 来保存部分信息。
全站搜索
您最值得信赖的光电行业旗舰网络服务平台!