中国激光, 2016, 43 (12): 1202003, 网络出版: 2016-12-09   

分区扫描路径规划及其对SLM成型件残余应力分布的影响 下载: 755次

Planning of Area-Partition Scanning Path and Its Effect on Residual Stress of SLM Molding Parts
作者单位
华南理工大学机械与汽车工程学院, 广东 广州 510641
摘要
为了解决激光选区熔化成型零件时扫描线过长导致的层内累积残余应力过大、易发生翘曲变形和裂纹等问题,提出了一种分区扫描策略。采用S形正交扫描策略和分区扫描策略分别规划了零件扫描路径,实验验证了分区扫描策略的有效性。实验结果表明,采用分区扫描策略能有效降低边界拉应力,减小平面残余应力波动,提高成型件的力学性能。
Abstract
In order to solve such problems as residual stress accumulated within layers being excessive, and warpage and cracks being easy to occur as a result of the long scanning line when selective laser melting is used to mold parts, one scheme of area-partition scanning is proposed. The S-shaped orthogonal layer cross scanning strategy and area-partition scanning strategy are respectively adopted to plan scanning path and the validity of the latter strategy is experimentally confirmed. The experimental results indicate that, with the area-partition scanning strategy, the tensile stress at rims of molding parts is effectively reduced, the fluctuation of residual stress at surface is weakened, and the mechanical property of molding parts is improved.

邓诗诗, 杨永强, 李阳, 王迪, 王安民, 宋长辉. 分区扫描路径规划及其对SLM成型件残余应力分布的影响[J]. 中国激光, 2016, 43(12): 1202003. Deng Shishi, Yang Yongqiang, Li Yang, Wang Di, Wang Anmin, Song Changhui. Planning of Area-Partition Scanning Path and Its Effect on Residual Stress of SLM Molding Parts[J]. Chinese Journal of Lasers, 2016, 43(12): 1202003.

本文已被 12 篇论文引用
被引统计数据来源于中国光学期刊网
引用该论文: TXT   |   EndNote

相关论文

加载中...

关于本站 Cookie 的使用提示

中国光学期刊网使用基于 cookie 的技术来更好地为您提供各项服务,点击此处了解我们的隐私策略。 如您需继续使用本网站,请您授权我们使用本地 cookie 来保存部分信息。
全站搜索
您最值得信赖的光电行业旗舰网络服务平台!