激光与光电子学进展, 2016, 53 (12): 121405, 网络出版: 2016-12-14
光纤激光焊接铝合金离焦量对焊缝成形的影响 下载: 635次
Effect of Defocusing Amount on Weld Shaping in Fiber Laser Welding of Aluminum Alloy
激光技术 光纤激光焊接 铝合金 离焦量 焊缝成形 laser technique fiber laser welding aluminum alloy defocusing amount weld shaping
摘要
采用高功率光纤激光对3 mm厚铝合金进行焊接实验, 系统研究了离焦量对焊缝熔池形貌、熔深、熔宽、底部驼峰及深宽比、宽度比例系数的影响。结果表明, 随着离焦量的增加, 焊接模式由深熔焊转变为热导焊, 熔宽变化不明显, 底部驼峰高度和宽度比例系数降低; 用高功率光纤激光焊接时, 通过减小负离焦量或改变为正离焦的方式能降低焊缝塌陷程度与底部驼峰高度; 用较低功率光纤激光焊接时, 通过增大负离焦量或减小正离焦量的方式能增大背面熔宽。
Abstract
The high power fiber laser is used to conduct a welding experiment on 3 mm thick aluminum alloy, and the effects of the defocusing amount on the morphology, penetration depth, penetration width, root humps, aspect ratios, and width ratio coefficient of weld pools are systematically investigated. The results show that, with the increase of the defocusing amount, the welding mode is transformed from the deep-penetration welding to heat-conduction one, the weld width does not change obviously, the root hump height and the width ratio coefficient decrease; with the high power fiber laser, the degree of welding bead subsidence and the height of root humps can be reduced by cutting back the negative defocusing amount or transforming into positive defocus; with the low power fiber laser, the back weld width could be increased by strengthening the negative defocusing amount or reducing the positive defocusing amount.
张健, 林仕君, 苏绍兴, 于艳玲, 费旺, 陈其宝, 曹宇, 唐霞辉. 光纤激光焊接铝合金离焦量对焊缝成形的影响[J]. 激光与光电子学进展, 2016, 53(12): 121405. Zhang Jian, Lin Shijun, Su Shaoxing, Yu Yanling, Fei Wang, Chen Qibao, Cao Yu, Tang Xiahui. Effect of Defocusing Amount on Weld Shaping in Fiber Laser Welding of Aluminum Alloy[J]. Laser & Optoelectronics Progress, 2016, 53(12): 121405.