中国激光, 2017, 44 (1): 0102010, 网络出版: 2017-01-10   

飞秒激光在钨表面制备二维周期复合结构的研究 下载: 1132次

Femtosecond Laser Fabrication of Two-Dimensional Periodic Composite Structures on Tungsten Surface
作者单位
1 南开大学现代光学研究所光学信息技术科学教育部重点实验室, 天津 300071
2 商丘师范学院电子电气工程学院, 河南 商丘 476000
摘要
通过控制飞秒激光脉冲分别在线偏振和角向偏振条件下的入射脉冲个数, 在金属钨材料表面获得了周期性亚波长条纹和金属纳米线复合而成的新型微纳米结构。实验结果表明, 线偏振激光脉冲诱导形成亚波长表面条纹结构的周期和脊面宽度随脉冲个数的增加而减小; 在两种不同偏振情况下, 飞秒激光脉冲在样品表面诱导形成的金属纳米线结构随激光脉冲个数的增加逐渐趋于消失, 而形成微纳米结构的区域面积随激光脉冲个数逐渐增加而增大, 并在飞秒激光脉冲个数为150时趋于不变。
Abstract
We report the fabrication of two-dimensional periodic composite micro- and nano-structures consisting of subwavelength ripples and nanowires on tungsten surface by adjusting femtosecond laser pulse number with either linear or azimuthal polarization in repetitive irradiation. The experiment results show that both the spatial periodicity and ridge width of the subwavelength ripples tend to decrease with the increase of the overlapped pulse number. Femtosecond laser pulses induced metallic nanowires on the sample surface gradually disappear when the overlapped pulse number of femtosecond laser with both polarization states increases. The structured area of the sample surface gradually increases with the increase of overlapped laser pulses number, but the obtained area appears to be saturated when the pulse number reaches up to 150.

乔红贞, 王飞, 张楠, 杨建军. 飞秒激光在钨表面制备二维周期复合结构的研究[J]. 中国激光, 2017, 44(1): 0102010. Qiao Hongzhen, Wang Fei, Zhang Nan, Yang Jianjun. Femtosecond Laser Fabrication of Two-Dimensional Periodic Composite Structures on Tungsten Surface[J]. Chinese Journal of Lasers, 2017, 44(1): 0102010.

本文已被 3 篇论文引用
被引统计数据来源于中国光学期刊网
引用该论文: TXT   |   EndNote

相关论文

加载中...

关于本站 Cookie 的使用提示

中国光学期刊网使用基于 cookie 的技术来更好地为您提供各项服务,点击此处了解我们的隐私策略。 如您需继续使用本网站,请您授权我们使用本地 cookie 来保存部分信息。
全站搜索
您最值得信赖的光电行业旗舰网络服务平台!