首页 > 论文 > 中国激光 > 44卷 > 1期(pp:102005--1)

激光微加工技术制备生物医用器械的现状与进展

Laser Microfabrication of Biomedical Devices

  • 摘要
  • 论文信息
  • 参考文献
  • 被引情况
  • PDF全文
分享:

摘要

激光微加工具有超快、超精密的特性, 在医疗器械加工中有着独特的优势, 尤其是针对具有良好生物相容性材料的微加工有着不可替代的作用。系统总结了激光微加工制备技术在生物医学领域的若干最新应用, 重点讨论了生物材料表面微加工、医学元件和血管支架微结构制备以及三维生物支架快速成型等技术, 并进一步指出现有激光微加工制备生物医用材料的局限和发展趋势。

Abstract

Laser microfabrication has unique advantages in medical devices, especially for biomedical compatible materials, due to its properties of ultrashort pulses and high precision. Some new investigations are summarized, such as laser micromachining of biomaterial surface microstructure, laser microfabrication of medical devices and stents as well as rapid prototyping of three-dimensional biomaterial scaffold. It points out the disadvantages of current laser microfabrication technologies in biomedical field and proposes suggestions for further development.

投稿润色
补充资料

中图分类号:TN249

DOI:10.3788/cjl201744.0102005

所属栏目:“超快激光加工与微纳制造”专题

基金项目:科技部973计划(2015CB059900)、北京市自然科学基金(39022303139022302)

收稿日期:2016-09-01

修改稿日期:2016-10-13

网络出版日期:--

作者单位    点击查看

卢立斌:北京航空航天大学机械工程与自动化学院, 北京 100191
王海鹏:北京航空航天大学机械工程与自动化学院, 北京 100191
管迎春:北京航空航天大学机械工程与自动化学院, 北京 100191北京航空航天大学国际交叉研究院, 北京 100191
周伟:College of Engineering, Nanyang Technological University, 50 Nanyang Avenue 639798, Singapore

联系人作者:卢立斌(lulibin@buaa.edu.cn)

备注:卢立斌(1987-), 男, 博士研究生, 主要从事激光材料加工方面的研究。

【1】Miller P R, Aggarwal R, Doraiswamy A, et al. Laser micromachining for biomedical applications[J]. JOM, 2009, 61(9): 35-40.

【2】Ruddock I S, Bradley D J. Bandwidth-limited subpicosecond pulse generation in mode-locked cw dye lasers[J]. Applied Physics Letters, 1976, 29(5): 296-297.

【3】Fork R L, Greene B I, Shank C V. Generation of optical pulses shorter than 0.1 psec by colliding pulse mode locking[J]. Applied Physics Letters, 1981, 38(9): 671-672.

【4】Pronko P P, VanRompay P A, Singh R K, et al. Laser induced avalanche ionization and electron-lattice heating of silicon with intense near IR femtosecond pulses[C]. MRS Proceedings, 1995, 397: 45-51.

【5】Li X, Jiang L, Wang C, et al. Transient localized material properties changes by ultrafast laser-pulse manipulation of electron dynamics in micro/nano manufacturing[J]. MRS Proceedings, 2011, 1365: mrss11-1365-tt01-01.

【6】Schaffer C B, Brodeur A, Mazur E. Laser-induced breakdown and damage in bulk transparent materials induced by tightly focused femtosecond laser pulses[J]. Measurement Science and Technology, 2001, 12(11): 1784-1794.

【7】Sanner N, Utéza O, Bussiere B, et al. Measurement of femtosecond laser-induced damage and ablation thresholds in dielectrics[J]. Applied Physics A, 2009, 94(4): 889-897.

【8】Le Harzic R, Huot N, Audouard E, et al. Comparison of heat-affected zones due to nanosecond and femtosecond laser pulses using transmission electronic microscopy[J]. Applied Physics Letters, 2002, 80(21): 3886-3888.

【9】Kautek W, Krüger J, Lenzner M, et al. Laser ablation of dielectrics with pulse durations between 20 fs and 3 ps[J]. Applied Physics Letters, 1996, 69(21): 3146-3148.

【10】Maselli V, Grenier J R, Ho S, et al. Femtosecond laser written optofluidic sensor: Bragg grating waveguide evanescent probing of microfluidic channel[J]. Optics Express, 2009, 17(14): 11719-11729.

【11】Cheng Jie, Yang Minghong, Wang Min, et al. Mach-Zehnder interference hydrogen sensor based on femtosecond laser processing[J]. Acta Optica Sinica, 2012, 32(7): 0706001.
成 洁, 杨明红, 王 闵, 等. 基于飞秒激光加工的马赫-曾德尔干涉氢气传感器[J]. 光学学报, 2012, 32(7): 0706001.

【12】Gittard S D, Narayan R J. Laser direct writing of micro- and nano-scale medical devices[J]. Expert Review of Medical Devices, 2010, 7(3): 343-356.

【13】Nolte S, Chichkov B N, Welling H, et al. Nanostructuring with spatially localized femtosecond laser pulses[J]. Optics Letters, 1999, 24(13): 914-916.

【14】Liu Y, Sun S, Singha S, et al. 3D femtosecond laser patterning of collagen for directed cell attachment[J]. Biomaterials, 2005, 26(22): 4597-4605.

【15】Maruo S, Ikuta K, Korogi H. Submicron manipulation tools driven by light in a liquid[J]. Applied Physics Letters, 2003, 82(1): 133-135.

【16】Doraiswamy A, Jin C, Narayan R J, et al. Two photon induced polymerization of organic-inorganic hybrid biomaterials for microstructured medical devices[J]. Acta Biomaterialia, 2006, 2(3): 267-275.

【17】Ostendorf A, Bauer T, Korte F, et al. Development of an industrial femtosecond laser micromachining system[C]. SPIE, 2002, 4633: 128-135.

【18】Wang Guisen, Wan Yi, Wang Teng, et al. Review on preparation of micro-nano structure on implant surface and its biocompatibility[J]. Surface Technology, 2016, 45(5): 8-18.
王桂森, 万 熠, 王 滕, 等. 植入体微纳结构表面制备及生物相容性研究综述[J]. 表面技术, 2016, 45(5): 8-18.

【19】Alves N M, Pashkuleva I, Reis R L, et al. Controlling cell behavior through the design of polymer surfaces[J]. Small, 2010, 6(20): 2208-2220.

【20】Seo C H, Jeong H, Furukawa K S, et al. The switching of focal adhesion maturation sites and actin filament activation for MSCs by topography of well-defined micropatterned surfaces[J]. Biomaterials, 2013, 34(7): 1764-1771.

【21】Anselme K, Bigerelle M. On the relation between surface roughness of metallic substrates and adhesion of human primary bone cells[J]. Scanning, 2014, 36(1): 11-20.

【22】Aebli N, Krebs J, Stich H, et al. In vivo comparison of the osseointegration of vacuum plasma sprayed titanium- and hydroxyapatite-coated implants[J]. Journal of Biomedical Materials Research Part A, 2003, 66A(2): 356-363.

【23】Dumas V, Rattner A, Vico L, et al. Multiscale grooved titanium processed with femtosecond laser influences mesenchymal stem cell morphology, adhesion, and matrix organization[J]. Journal of Biomedical Materials Research Part A, 2012, 100A(11): 3108-3116.

【24】Cunha A, Serro A P, Oliveira V, et al. Wetting behaviour of femtosecond laser textured Ti-6Al-4V surfaces[J]. Applied Surface Science, 2013, 265: 688-696.

【25】Oliveira V, Polushkin N I, Conde O, et al. Laser surface patterning using a Michelson interferometer and femtosecond laser radiation[J]. Optics & Laser Technology, 2012, 44(7): 2072-2075.

【26】Koufaki N, Ranella A, Aifantis K E, et al. Controlling cell adhesion via replication of laser micro/nano- textured surfaces on polymers[J]. Biofabrication, 2011, 3(4): 045004.

【27】Wang Rui, Zhou Yanmin. Application of femto-second laser in titanium alloy surface modification and its influence in adhesion and proliferation of osteoblasts[J]. Journal of Jilin University (Medicine Edition), 2013, 39(3): 453-457.
王 瑞, 周延民. 飞秒激光在钛合金表面改性中的应用及其对成骨细胞黏附和增殖的影响[J]. 吉林大学学报(医学版), 2013, 39(3): 453-457.

【28】Dumas V, Guignandon A, Vico L, et al. Femtosecond laser nano/micro patterning of titanium influences mesenchymal stem cell adhesion and commitment[J]. Biomedical Materials, 2015, 10(5): 055002.

【29】Cunha A, Zouani O F, Plawinski L, et al. Human mesenchymal stem cell behavior on femtosecond laser-textured Ti-6Al-4V surfaces[J]. Nanomedicine, 2015, 10(5): 725-739.

【30】Zhang R, Wan Y, Ai X, et al. Preparation of micro-nanostructure on titanium implants and its bioactivity[J]. Transactions of Nonferrous Metals Society of China, 2016, 26(4): 1019-1024.

【31】Allegrini Jr S, Yoshimoto M, Barbosa Salles M, et al. Biologic response to titanium implants with laser-treated surfaces[J]. International Journal of Oral & Maxillofacial Implants, 2014, 29(1): 1-8.

【32】Sa A R, Mousavi S A, Seyedjafari E, et al. Polycarbonate surface cell''s adhesion examination after Nd:YAG laser irradiation[J]. Materials Science and Engineering C, 2009, 29(4): 1491-1497.

【33】Spearing S M. Materials issues in microelectromechanical systems (MEMS)[J]. Acta Materialia, 2000, 48(1): 179-196.

【34】Birmpiliotis D, Czarnecki P, Koutsoureli M, et al. Assessment of dielectric charging in capacitive MEMS switches fabricated on Si substrate with thin oxide film[J]. Microelectronic Engineering, 2016, 159: 209-214.

【35】Jeong J, Shin S, Lee G J, et al. Advancements in fabrication process of microelectrode array for a retinal prosthesis using liquid crystal polymer (LCP)[C]. IEEE, 2013: 5295-5298.

【36】Green R A, Ordonez J S, Schuettler M, et al. Cytotoxicity of implantable microelectrode arrays produced by laser micromachining[J]. Biomaterials, 2010, 31(5): 886-893.

【37】Suaning G J, Schuettler M, Ordonez J S, et al. Fabrication of multi-layer, high-density micro-electrode arrays for neural stimulation and bio-signal recording[C]. CNE ′07. 3rd International IEEE/EMBS Conference on Neural Engineering, 2007: 5-8.

【38】Safadi M R, Scott A J, Thakur J, et al. Fabrication of a waveguide for biomedical applications using novel micromachining techniques[C]. SPIE, 2004, 5588: 205-213.

【39】Yuan D, Das S. Experimental and theoretical analysis of direct-write laser micromachining of polymethyl methacrylate by CO2 laser ablation[J]. Journal of Applied Physics, 2007, 101(2): 024901.

【40】Teixidor D, Orozco F, Thepsonthi T, et al. Effect of process parameters in nanosecond pulsed laser micromachining of PMMA-based microchannels at near-infrared and ultraviolet wavelengths[J]. The International Journal of Advanced Manufacturing Technology, 2013, 67(5-8): 1651-1664.

【41】Criales L E, Orozco P F, Medrano A, et al. Effect of fluence and pulse overlapping on fabrication of microchannels in PMMA/PDMS via UV laser micromachining: modeling and experimentation[J]. Materials and Manufacturing Processes, 2015, 30: 890-901.

【42】Guo X, Tavakoli B, Kang H J, et al. Photoacoustic active ultrasound element for catheter tracking[C]. SPIE , 2014, 8943: 89435M.

【43】Bell J A, Saikus C E, Ratnayaka K, et al. A deflectable guiding catheter for real-time MRI-guided interventions[J]. Journal of Magnetic Resonance Imaging, 2012, 35(4): 908-915.

【44】Lee K K C, Munce N R, Shoa T, et al. Fabrication and characterization of laser-micromachined polypyrrole-based artificial muscle actuated catheters[J]. Sensors and Actuators A: Physical, 2009, 153(2): 230-236.

【45】Wongwiwat P, Narayan R J, Lee Y S. Improving biocompatibily of laser micromachined silicon wafer by surface cating with poly (ethylene glycol) diacrylate and diamond-like carbon for biomedical devices[C]. ASME, 2010, MSEC2010-34283: 273-280.

【46】Crucho C I C, Barros M T. Formulation of functionalized PLGA polymeric nanoparticles for targeted drug delivery[J]. Polymer, 2015, 68: 41-46.

【47】Zehbe R, Zehbe K. Strontium doped poly-ε-caprolactone composite scaffolds made by reactive foaming[J]. Materials Science and Engineering: C, 2016, 67: 259-266.

【48】Kim M S, Son J G, Lee H J, et al. Highly porous 3D nanofibrous scaffolds processed with an electrospinning/laser process[J]. Current Applied Physics, 2014, 14(1): 1-7.

【49】Wang J, Valmikinathan C M, Liu W, et al. Spiral-structured,nanofibrous, 3D scaffolds for bone tissue engineering[J]. Journal of Biomedical Materials Research Part A, 2010, 93(2): 753-762.

【50】Kancharla V V, Chen S. Fabrication of biodegradable polymeric micro-devices using laser micromachining[J]. Biomedical Microdevices, 2002, 4(2): 105-109.

【51】Zhong Minlin, Fan Peixun. Applications of laser nano manufacturing technologies[J]. Chinese J Lasers, 2011, 38(6): 0601001.
钟敏霖, 范培迅. 激光纳米制造技术的应用[J]. 中国激光, 2011, 38(6): 0601001.

【52】Meng H, Liao J, Zhou Y, et al. Laser micro-processing of cardiovascular stent with fiber laser cutting system[J]. Optics & Laser Technology, 2009, 41(3): 300-302.

【53】Muhammad N, Whitehead D, Boor A, et al. Comparison of dry and wet fibre laser profile cutting of thin 316L stainless steel tubes for medical device applications[J]. Journal of Materials Processing Technology, 2010, 210(15): 2261-2267.

【54】Hendricks F, Patel R, Matylitsky V V. Micromachining of bio-absorbable stents with ultra-short pulse lasers[C]. SPIE, 2015, 9355: 935502.

【55】Kathuria Y P. Laser microprocessing of metallic stent for medical therapy[J]. Journal of Materials Processing Technology, 2005, 170(3): 545-550.

【56】Huang Yuan, Tian Zheng, Liu Wenxi, et al. Influence of process techniques on biocompatibility of coronary artery stent[J]. Journal of Tianjin University (Sci Technol), 2003, 36(3): 374-379.
黄 远, 田 筝, 刘文西, 等. 加工工艺对医用心血管支架生物相容性的影响[J]. 天津大学学报(自然科学与工程技术版), 2003, 36(3): 374-379.

【57】Zeng R, Dietzel W, Witte F, et al. Progress and challenge for magnesium alloys as biomaterials[J]. Advanced Engineering Materials, 2008, 10(8): B3-B14.

【58】Farè S, Ge Q, Vedani M, et al. Evaluation of material properties and design requirements for biodegradable magnesium stents[J]. Matéria, 2010, 15(2): 96-103.

【59】Demir A G, Previtali B, Colombo D, et al. Fiber laser micromachining of magnesium alloy tubes for biocompatible and biodegradable cardiovascular stents[C]. SPIE, 2012, 8237: 823730.

【60】张亚臣, 荣烨之. 医用聚乳酸的生物特性及其临床应用[J]. 上海医学, 2005, 28(1): 79-80.

【61】Stolberg K, Friedel S, Kremser B, et al. IR and green femtosecond laser machining of heat sensitive materials for medical devices at micrometer scale[C]. SPIE, 2014, 8968: 89680E.

【62】Cheng Ping, Wei Di, Wu Benke, et al. Femtosecond laser precision machining of biodegradable heart stent[J]. Optics and Precision Engineering, 2014, 22(1): 63-68.
程 萍, 位 迪, 吴本科, 等. 可降解心脏支架的飞秒激光精密加工[J]. 光学 精密工程, 2014, 22(1): 63-68.

【63】Langer R, Vacanti J P. Tissue engineering[J]. Science, 1993, 260(5110): 920-926.

【64】Prabhakaran M P, Venugopal J, Kai D, et al. Biomimetic material strategies for cardiac tissue engineering[J]. Materials Science and Engineering: C, 2011, 31(3): 503-513.

【65】Chiu Y W, Chen W P, Su C C, et al. The arrhythmogenic effect of self-assembling nanopeptide hydrogel scaffolds on neonatal mouse cardiomyocytes[J]. Nanomedicine: Nanotechnology, Biology and Medicine, 2014, 10(5): 1065-1073.

【66】Saranya N, Saravanan S, Moorthi A, et al. Enhanced osteoblast adhesion on polymeric nano-scaffolds for bone tissue engineering[J]. Journal of Biomedical Nanotechnology, 2011, 7(2): 238-244.

【67】Heinemann S, Heinemann C, Jager M, et al. Effect of silica and hydroxyapatite mineralization on the mechanical properties and the biocompatibility of nanocomposite collagen scaffolds[J]. ACS Applied Materials & Interfaces, 2011, 3(11): 4323-4331.

【68】Anastasiou A D, Thomson C L, Hussain S A, et al. Sintering of calcium phosphates with a femtosecond pulsed laser for hard tissue engineering[J]. Materials & Design, 2016, 101: 346-354.

【69】Landers R, Hubner U, Schmelzeisen R, et al. Rapid prototyping of scaffolds derived from thermoreversible hydrogels and tailored for applications in tissue engineering[J]. Biomaterials, 2002, 23(23): 4437-4447.

【70】Wiria F E, Chua C K, Leong K F, et al. Improved biocomposite development of poly (vinyl alcohol) and hydroxyapatite for tissue engineering scaffold fabrication using selective laser sintering[J]. Journal of Materials Science: Materials in Medicine, 2008, 19(3): 989-996.

【71】Kolan K C R, Leu M C, Hilmas G E, et al. Effect of material, process parameters, and simulated body fluids on mechanical properties of 13-93 bioactive glass porous constructs made by selective laser sintering[J]. Journal of the Mechanical Behavior of Biomedical Materials, 2012, 13: 14-24.

【72】Sobral J M, Caridade S G, Sousa R A, et al. Three-dimensional plotted scaffolds with controlled pore size gradients: effect of scaffold geometry on mechanical performance and cell seeding efficiency[J]. Acta Biomaterialia, 2011, 7(3): 1009-1018.

【73】Van Bael S, Chai Y C, Truscello S, et al. The effect of pore geometry on the in vitro biological behavior of human periosteum-derived cells seeded on selective laser-melted Ti6Al4V bone scaffolds[J]. Acta Biomaterialia, 2012, 8(7): 2824-2834.

【74】Chu T M G. In vivo evaluation of 13-93 bioactive glass scaffolds made by selective laser sintering (SLS)[J]. Biomaterials Science: Processing, Properties and Applications II: Ceramic Transactions, 2012, 237: 91-99.

【75】Fukuda A, Takemoto M, Saito T, et al. Osteoinduction of porous Ti implants with a channel structure fabricated by selective laser melting[J]. Acta Biomaterialia, 2011, 7(5): 2327-2336.

【76】Li Xiang, Li Dichen, Wang Lin, et al. Fabrication of bone tissue engineering scaffolds based on RP and analysis of biological properties[J]. China Mechanical Engineering, 2005, 16(12): 1117-1120.
李 祥, 李涤尘, 王 林, 等. 基于RP的骨组织工程支架构造及生物学特性分析[J]. 中国机械工程, 2005, 16(12): 1117-1120.

【77】Huang W, Feng P, Gao C, et al. Microstructure, mechanical, and biological properties of porous poly (vinylidene fluoride) scaffolds fabricated by selective laser sintering[J]. International Journal of Polymer Science, 2015, 2015: 132965.

【78】Shuai C, Feng P, Zhang L, et al. Correlation between properties and microstructure of laser sintered porous β-tricalcium phosphate bone scaffolds[J]. Science and Technology of Advanced Materials, 2016, 14(5): 055002.

【79】Van Bael S, Chai Y C, Truscello S, et al. The effect of pore geometry on the in vitro biological behavior of human periosteum-derived cells seeded on selective laser-melted Ti6Al4V bone scaffolds[J]. Acta Biomaterialia, 2012, 8(7): 2824-2834.

【80】Leong K F, Cheah C M, Chua C K. Solid freeform fabrication of three-dimensional scaffolds for engineering replacement tissues and organs[J]. Biomaterials, 2003, 24(13): 2363-2378.

引用该论文

Lu Libin,Wang Haipeng,Guan Yingchun,Zhou Wei. Laser Microfabrication of Biomedical Devices[J]. Chinese Journal of Lasers, 2017, 44(1): 0102005

卢立斌,王海鹏,管迎春,周伟. 激光微加工技术制备生物医用器械的现状与进展[J]. 中国激光, 2017, 44(1): 0102005

您的浏览器不支持PDF插件,请使用最新的(Chrome/Fire Fox等)浏览器.或者您还可以点击此处下载该论文PDF