激光技术, 2017, 41 (2): 169, 网络出版: 2017-03-29   

基于射频信号2阶零功率的链路色散测量技术

Dispersion measuring technique based on second order lowest power of radio frequency signal
作者单位
华中科技大学 光学与电子信息学院, 武汉 430074
摘要
为了适应高速率大色散光纤信道对链路色散的精确补偿要求, 研究并提出了一种基于射频信号2阶零功率点的信道色散测量方案。采用信号两边带的位相差来测量光纤链路中的色散值, 通过在发射端加载射频信号, 可以得到接收端射频信号功率大小随链路色散值的周期性变化关系, 从仿真光纤链路色散随射频信号频率的变化曲线获得接收端射频信号2阶零功率点位置。结果表明, 基于射频信号2阶零功率的信号测量方案色散测量误差可控制在±10ps/nm范围内。相较于1阶零功率点, 基于射频信号2阶零功率点信道色散测量方案可满足高速率、长距离大色散光纤信道对色散值的精确测量需求。
Abstract
In order to meet the need of precise compensation of chromatic dispersion in optical fiber link with long distance and high bit rate, channel dispersion measurement technique based on second order lowest power of radio frequency (RF) signal was studied and demonstrated. The chromatic dispersion in optical fiber link was measured by the phase difference between RF signals that loaded to two sidebands of spectrum. By loading RF signal on the transmitter, the periodic relationship between the power of RF signal in the receiver and optical fiber dispersion was obtained. The position of second lowest RF signal power was gotten by simulation of relationship curve between the power of RF signal in the receiver and optical fiber dispersion. The results show that, the dispersion measuring error in this system is in the range of ±10ps/nm. Comparing with the technique based on first order lowest power of RF signal, dispersion measuring technique based on second order lowest power of RF signal can satisfy the need of measuring large fiber dispersion for high chromatic dispersion value.

贺成, 罗风光, 李斌. 基于射频信号2阶零功率的链路色散测量技术[J]. 激光技术, 2017, 41(2): 169. HE Cheng, LUO Fengguang, LI Bin. Dispersion measuring technique based on second order lowest power of radio frequency signal[J]. Laser Technology, 2017, 41(2): 169.

本文已被 1 篇论文引用
被引统计数据来源于中国光学期刊网
引用该论文: TXT   |   EndNote

相关论文

加载中...

关于本站 Cookie 的使用提示

中国光学期刊网使用基于 cookie 的技术来更好地为您提供各项服务,点击此处了解我们的隐私策略。 如您需继续使用本网站,请您授权我们使用本地 cookie 来保存部分信息。
全站搜索
您最值得信赖的光电行业旗舰网络服务平台!