中国光学, 2017, 10 (2): 241, 网络出版: 2017-04-10   

非链式脉冲DF激光器放电生成物处理技术

Treating technology of discharge products in no-chain pulsed DF laser
作者单位
1 海军驻长春地区航空军事代表室, 吉林 长春 130033
2 中国科学院 长春光学精密机械与物理研究所 激光与物质相互作用国家重点实验室, 吉林 长春 130033
3 中国科学院 长春光学精密机械与物理研究所 光电对抗技术创新研究室, 吉林 长春 130033
摘要
非链式脉冲DF激光器放电产生的基态DF分子对激发态DF分子的消激发作用是影响激光器稳定工作的重要原因。为解决这一问题, 分别采用3A和5A分子筛作为吸附剂进行实验研究。无分子筛时, 激光器重频运转1 000个脉冲后, 输出功率下降到初始功率的56%。分别使用3A、5A分子筛后, 激光器重频运转脉冲个数达到5 000和6 800时, 输出功率下降幅度仍然不超过20%, 大大提高了激光器的稳定工作时间。实验结果表明, 5A分子筛的吸附效率大于3A分子筛, 且两种分子筛不仅对基态DF分子产生吸附, 还对工作气体产生吸附, 可通过及时补充工作气体提高激光器的稳定性。
Abstract
The de-excitation effect of ground state DF molecules after dicharge of no-chain pulsed DF laser to excited DF molecules is an important cause for laser′s steady working. In order to solve this problem, molecular sieves of 3A and 5A were respectively used as the adsorbent for experiments. Without molecular sieve, the laser output power decreased to 56% of initial power after 1 000 repetitive pulses. After 3A and 5A molecular sieve being utilized, the decrease of laser power were less than 20% after 5 000 and 6 800 shots respectively, so the stability of the laser has been greatly improved. The results show that the adsorptive efficiency of 5A molecular sieve is higher than that of 3A molecular sieve. And these two molecular sieves adsorbed not only the ground DF molecules, but also reacting gas. So the stability of laser can be improved by supplementing of reacting gas timely.

赵建川, 王春锐, 谢冀江. 非链式脉冲DF激光器放电生成物处理技术[J]. 中国光学, 2017, 10(2): 241. ZHAO Jian-chuan, WANG Chun-rui, XIE Ji-jiang. Treating technology of discharge products in no-chain pulsed DF laser[J]. Chinese Optics, 2017, 10(2): 241.

本文已被 1 篇论文引用
被引统计数据来源于中国光学期刊网
引用该论文: TXT   |   EndNote

相关论文

加载中...

关于本站 Cookie 的使用提示

中国光学期刊网使用基于 cookie 的技术来更好地为您提供各项服务,点击此处了解我们的隐私策略。 如您需继续使用本网站,请您授权我们使用本地 cookie 来保存部分信息。
全站搜索
您最值得信赖的光电行业旗舰网络服务平台!