光子学报, 2017, 46 (4): 0406003, 网络出版: 2017-05-03   

基于腐蚀光纤的温度及葡萄糖溶液浓度传感器

A Temperature and Glucose Solution Concentration Sensor Based on Etched Optical Fiber
作者单位
武汉理工大学 光纤传感技术国家工程实验室, 武汉 430070
摘要
提出并制备了一种基于本征倏逝波原理的温度及葡萄糖溶液浓度传感器.通过研究腐蚀包层厚度与透射光谱之间的关系, 确定较为合适的腐蚀厚度.将标准单模光纤包层腐蚀至2.4 μm, 利用光纤倏逝波对外界介质变化敏感的原理, 通过测量输出光功率的变化量实现温度及葡萄糖溶液浓度传感.实验结果表明:传感器在10~70 ℃的温度范围内具有9.58×10-3 dBm/℃的灵敏度, 线性度达到99.36%; 在葡萄糖溶液0~3%的浓度范围内具有0.126 dBm/(g/L)的灵敏度, 线性度达到97.95%.该传感器的响应时间小于30 s, 具有操作简便、测量准确度高、重复性好、适用范围广等优点, 具备良好的应用价值.
Abstract
A temperature and glucose solution concentration sensor based on intrinsic evanescent wave was proposed and fabricated. By studying on the relationship between the thickness of etched fiber coating and the output spectrum, the suitable etching thickness was determined. The cladding of a standard single-mode optical fiber was etched to 2.4 μm, and the temperature and glucose solution concentration sensing were realized by measuring the variation of output optical power, because optical fiber evanescent wave is extremely sensitive to the change of external medium. The experimental results show that the sensor has temperature sensitivity of 9.58×10-3 dBm/°C at the range of 10~70 °C with linearity as high as 99.36% and glucose solution concentration sensitivity of 0.126 dBm/(g/L) at the concentration range of 0~3% with linearity of 97.95%. The response time of the sensor is less than 30 s. The sensor has advantages of simple operation, high accuracy, good reproducibility and wide application range, thus has potential application value.

马健, 郑羽, 余海湖. 基于腐蚀光纤的温度及葡萄糖溶液浓度传感器[J]. 光子学报, 2017, 46(4): 0406003. MA Jian, ZHENG Yu, YU Hai-hu. A Temperature and Glucose Solution Concentration Sensor Based on Etched Optical Fiber[J]. ACTA PHOTONICA SINICA, 2017, 46(4): 0406003.

本文已被 2 篇论文引用
被引统计数据来源于中国光学期刊网
引用该论文: TXT   |   EndNote

相关论文

加载中...

关于本站 Cookie 的使用提示

中国光学期刊网使用基于 cookie 的技术来更好地为您提供各项服务,点击此处了解我们的隐私策略。 如您需继续使用本网站,请您授权我们使用本地 cookie 来保存部分信息。
全站搜索
您最值得信赖的光电行业旗舰网络服务平台!